Canon MX470 series User Manual

2803
Cause
The document is too long or is jammed in the ADF.
Action
Press the OK button to dismiss the error. Then make sure that the document you are loading meets the
machine's requirements before redoing the operation.
If the document is jammed, remove the jammed document following the procedure below.
• If the original is jammed in the ADF:
Remove the document following the procedure below.
1. If printing is in progress, press the Stop button.
2. Turn off the machine.
3. If a multi-page document is loaded, remove any pages other than the jammed page from the
ADF, then open the document feeder cover.
4. Pull out the jammed document from the ADF.
5. Close the document feeder cover, then turn on the machine.
When rescanning the document after clearing the error, rescan it from the first page.
If you cannot remove the document or the document tears inside the machine, or if the document jam
error continues after removing the document, contact the service center.
646

Canon MX470 series Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Max Print Resolution	4800 x 1200 dpi
Automatic Document Feeder	Yes
Duplex Printing	Manual
Wireless	Yes
AirPrint	Yes
Google Cloud Print	Yes
Mobile Printing	Yes
Scanner Type	Flatbed, ADF
Scan Resolution (Maximum)	1200 x 2400 dpi
Fax Speed (Maximum)	33.6 kbps
Printer Type	All-in-One
Input Capacity	100 sheets
Connectivity	USB
Operating System Support	Windows, Mac
Print Speed (Black)	9.7 ipm
Print Speed (Color)	5.5 ipm
Paper Sizes Supported	A4, A5, B5, Envelopes, Letter, Legal
Copier Speed (Color)	4.7 ipm
Ink Cartridges	PG-240, CL-241