Why Canon Camcorder will not focus?
If your Canon camcorder will not focus, there could be several reasons. First, the autofocus may not work on the particular subject you're trying to film, in which case you should focus manually. Second, the viewfinder might not be properly adjusted; use the diopter adjustment lever to correct this. Finally, the lens could be dirty, so try cleaning it.
Why Canon Optura 300 Camcorder viewfinder picture is blurred?
If your Canon camcorder displays a blurred picture in the viewfinder, it is likely that the viewfinder is not adjusted properly. Correct this by using the diopter adjustment lever to adjust the viewfinder.
Why image will not appear on the TV screen with Canon Camcorder?
If images do not appear on the TV screen, check the following: Ensure that [AV/PHONES] is set to [AV] in the menu, not [PHONESH]. Also, verify that [AV / DV OUT] is set to [OFF], not [ON].
Why Canon Optura 300 memory card cannot be recorded?
If your Canon camcorder's memory card cannot be recorded, it may be due to several reasons: The memory card might be full, so replace it or erase some images. The card might not be formatted, so format it. Ensure the memory card is properly inserted. If the file number has reached its maximum value, set [FILE NUMBERS] to [RESET] and insert a new card. Also, check if the SD Memory Card is protected, and if so, change the position of the protect switch.
Why Canon Optura 300 switches off by itself?
If your Canon camcorder switches off by itself, the battery pack is likely exhausted. Replace or charge the battery pack.
What to do if Canon Optura 300 cassette compartment will not open?
If the cassette compartment of your Canon camcorder will not open, the battery pack is likely exhausted. Replace or charge the battery pack.
What to do if Canon Optura 300 Camcorder memory card cannot be inserted?
If your Canon camcorder's memory card cannot be inserted, ensure that the memory card is facing the correct direction. Turn the memory card over and reinsert it.
What to do if Canon Camcorder cassette compartment stopped during loading/unloading?
If the cassette compartment of your Canon camcorder stops during loading or unloading, the battery pack is likely exhausted. Replace or charge the battery pack.
Why Canon Optura 300 Camcorder LCD/viewfinder switches on and off?
If your Canon camcorder's LCD/viewfinder switches on and off, the battery pack is likely exhausted. Replace or charge the battery pack.
Why Canon Optura 300 buttons will not work?
If the buttons on your Canon camcorder are not working, it is possible that the camcorder is not turned on. Turn on the camcorder.
To Next Page
General
