Why are the print results not satisfactory on my Canon All in One Printer?
If the Canon All in One Printer's print results are not satisfactory, confirm the paper and print quality settings first.
What to do if Canon PIXMA MX300 says 'LOAD PAPER'?
If your Canon All in One Printer displays 'LOAD PAPER', reload the paper correctly and press the OK button.
What to do if my Canon PIXMA MX300 says 'CHECK INK U163'?
If your Canon All in One Printer displays 'CHECK INK U163' because the ink has run out, replace the ink cartridge and close the Scanning Unit (Printer Cover). If printing is in progress and you want to continue, press the Stop/Reset button for at least 5 seconds with the ink cartridge installed.
What to do if Canon All in One Printer says 'CHECK INK U162'?
If your Canon All in One Printer displays 'CHECK INK U162' because ink may have run out, press the Stop/Reset button for at least 5 seconds to continue printing without the function for detecting the remaining ink level.
What does 'NO RX PAPER' mean on my Canon All in One Printer?
If your Canon All in One Printer displays 'NO RX PAPER' because the other party’s fax machine is out of paper or its memory is full, contact the other party and have them load paper or free up space in their fax machine’s memory.
What to do if Canon PIXMA MX300 All in One Printer displays 'NO TEL NUMBER'?
If your Canon All in One Printer displays 'NO TEL NUMBER' because the coded speed dialing code you entered has not been registered, register the coded speed dialing code.
Why does my Canon All in One Printer say 'DEVICE IN USE CANNOT TURN OFF'?
If your Canon All in One Printer displays 'DEVICE IN USE CANNOT TURN OFF' because the machine is performing an operation, wait until the operation has finished, then turn off the machine.
Why is my Canon PIXMA MX300 paper not feeding properly?
If your Canon All in One Printer displays 'PAPER DOES NOT FEED PROPERLY' because you are printing on an inappropriate type of paper, check to see if the paper you are printing on is not too thick or curled.
Why are the colors unclear when printing with my Canon PIXMA MX300?
If the Canon All in One Printer is printing colors that are unclear because color correction is not enabled, enabling color correction when printing photographs or other graphics may improve color.
What to do if Canon All in One Printer displays 'CHECK PRINTER'?
If your Canon All in One Printer displays 'CHECK PRINTER', turn off the machine, unplug the power cord, then plug it back in and turn on the machine.
Step-by-step instructions for powering the machine on and off.
Requirements for original documents and how to load them on the platen glass.
Basic procedure for creating copies using the machine's operation panel.
Step-by-step guide for printing documents from a Windows computer.
Step-by-step guide for printing documents from a Macintosh computer.
Procedure for connecting and printing photos from PictBridge devices.
Explains typical connection examples and important notes for fax setup.
Instructions to set the correct telephone line type for optimal fax performance.
Step-by-step guide for sending faxes by memory.
Basic procedure and modes for receiving incoming faxes.
Troubleshooting steps for faint prints or incorrect colors, likely due to clogged nozzles.
Procedure to print the nozzle check pattern to diagnose print head issues.
Steps to clean the print head to resolve missing lines or white streaks.
Procedure for a more powerful print head cleaning cycle.
Instructions to adjust print head position for misaligned lines or poor results.
Guide on confirming ink status and replacing FINE cartridges.
Guide to resolving error messages displayed on the machine's LCD.
Solutions for issues encountered during MP Driver installation.
Troubleshooting steps for slow printing or USB connection issues.
Steps to check paper/quality settings and troubleshoot poor print results.
Troubleshooting print start issues, blurriness, color problems, and misaligned lines.
Steps to resolve issues with paper not feeding correctly into the machine.
Procedure for removing paper jams from the output slot or rear tray.
Troubleshooting error messages displayed on the computer screen.
Troubleshooting messages appearing on PictBridge devices during printing.
Solutions for issues when using the scanning function.
Troubleshooting steps for issues related to receiving faxes.
Troubleshooting steps for issues encountered when sending faxes.
General| Print Technology | Inkjet |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Resolution | Up to 4800 x 1200 dpi |
| Scanner Type | Flatbed |
| Fax Memory | Up to 50 pages |
| Connectivity | USB 2.0 |
| Print Speed (Black) | Approx. 22 ppm |
| Print Speed (Color) | 17 ppm |
| Scanner Resolution | 1200 x 2400 dpi |
| Fax Speed | Approx. 3 sec. per page (33.6 Kbps) |
| Paper Handling | 100-sheet input tray |
| Paper Sizes | Letter, Legal, Envelopes |
| Ink Cartridges | PG-40 Black, CL-41 Color |
| Operating System Compatibility | Windows, macOS |
To Next Page
