To Next PageTo Next PageWhat does 'NO ANSWER' mean on my Canon All in One Printer?
If your Canon All in One Printer displays 'NO ANSWER', it means the recipient’s fax machine did not answer. Check the number and try dialing again after waiting a moment.
How to fix 'CHECK INK U163' on a Canon All in One Printer?
If your Canon All in One Printer shows 'CHECK INK U163', it means the ink has run out. Replace the ink cartridge and then close the Scanning Unit (Printer Cover).
How to bypass 'CHECK INK U162' on my Canon All in One Printer?
If your Canon All in One Printer displays 'CHECK INK U162', it means ink may have run out. To continue printing without detecting ink levels, press the Stop/Reset button for at least 5 seconds.
How to fix 'CHECK INK U051/U052/U053/U059' error on Canon All in One Printer?
If your Canon All in One Printer displays 'CHECK INK U051/U052/U053/U059', the FINE Cartridge may not be installed correctly, or it might not be compatible with your printer. Open the Scanning Unit (Printer Cover) and install the appropriate FINE Cartridge.
How to fix a 'SCANNER ERROR' on a Canon All in One Printer?
If the Canon All in One Printer displays 'SCANNER ERROR', turn the machine off and then back on again.
How to fix 'CANNOT SCAN FROM ADF' error on Canon All in One Printer?
If your Canon All in One Printer displays 'CANNOT SCAN FROM ADF', it means the document is loaded in the ADF when applying FIT-TO-PAGE in ENLARGE/REDUCE. Load the document on the Platen Glass when copying.
What does 'CHECK DOCUMENT' mean on my Canon All in One Printer?
If the Canon All in One Printer displays 'CHECK DOCUMENT', it indicates that there is no document in the ADF. Press the OK button to resolve the error, then operate again after loading the documents.
How to resolve 'INCOMPATIBLE CAMERA' error on Canon All in One Printer?
If your Canon All in One Printer displays 'INCOMPATIBLE CAMERA', a communication time out occurred because an operation took too long or it took too much time to send data. Disconnect and then reconnect the USB cable.
What to do if my Canon All in One Printer says 'COVER IS OPEN'?
If your Canon All in One Printer displays 'COVER IS OPEN', it means that the Scanning Unit (Printer Cover) was opened during an operation. Return the Scanning Unit (Printer Cover) to its original position.
What to do if my Canon All in One Printer says 'LOAD PAPER'?
If your Canon All in One Printer displays 'LOAD PAPER', it indicates that the printer is out of paper. Reload the paper correctly into the printer and then press the OK button.
General| Print Technology | Inkjet |
|---|---|
| Max Print Resolution | 4800 x 1200 dpi |
| Scanner Type | Flatbed |
| Optical Scan Resolution | 1200 x 2400 dpi |
| Connectivity | USB 2.0 |
| Fax Transmission Speed | Approx. 3 seconds per page |
| Automatic Document Feeder | Yes |
| Functions | Print, Copy, Scan, Fax |
| Fax Modem Speed | 33.6 Kbps |
| Printer Type | Multifunction |
| Paper Sizes | A4, A5, B5, Letter, Legal, Envelopes, 4" x 6", 5" x 7", 8" x 10" |
| Automatic Document Feeder (ADF) | Yes |
Identifies and describes the function of each button and the LCD on the machine's control panel.
Basic procedure for making copies, including turning on the machine, loading paper/originals, and selecting copy options.
Covers basic fax sending, memory sending, using speed dial, redialing, and computer faxing.
Procedures for selecting receive modes and changing print settings for incoming faxes.
Steps to diagnose and fix print quality issues via nozzle checks, cleaning, and head alignment.
Guides on checking ink status and replacing FINE cartridges when ink runs out.
Resolving LCD errors, blank screens, and incorrect language displays.
Diagnosing and fixing print quality problems like blurriness, streaks, smudges, and paper issues.
Guides for resolving paper feeding errors and document jams in the ADF.
Addressing computer-related error messages and specific machine error codes.
Troubleshooting fax transmission, reception, telephone line issues, and scanning errors.
Essential safety guidelines regarding machine placement, power, handling, and cartridges.
