Canon PowerShot A550 User Guide Basic User Manual

19
Single Playback/Erasing
1. Press the / button (
a
).
The last recorded image will display. If you have
played back images between shooting sessions
however, the last image viewed will display (Resume
Playback) instead of the last recorded image. If the
memory card has been switched, or the images on
the memory card have been edited with a computer,
the newest image on the memory card appears.
2. Use the or button to display the image you wish to view (
b
).
Use the button to move to the previous image and the button to
move to the next image.
Holding the button down advances the images more rapidly, but shows
them less clearly.
1. In the playback mode, use the or button to select
an image to erase (
a
) and press the button (
b
).
2. Confirm that [Erase] is selected and
press the FUNC./SET button (
c
),
To exit instead of erasing, select [Cancel].
Single Playback
Î
See the Advanced Guide for the various playback methods available.
Erasing
Please note that erased images cannot be
recovered. Exercise adequate caution before
erasing an image.
Î
See the Advanced Guide: Erasing All Images (p. 68).

Canon PowerShot A550 User Guide Basic Specifications

General

Brand	Canon
Model	PowerShot A550 User Guide Basic
Category	Digital Camera
Language	English