Canon pz-e1 - General Precautions; Handling Precautions; Shooting Precautions

Safety Precautions
Caution
Details
pertaining to risks that may
result
in
damage to property.
• This is a precision instrument.
Do
not drop
it,
subject it to shock, or attempt to
dismantle
it
yourself.
•
When carrying a
lens
or a camera to which the
adapter
is
attached, always
carry it by the
lens/
camera body.
•
Do
not
leave
the adapter
in
excessive heat such as
in
a car
in
direct sunlight. High temperatures can
cause the adapter to
malfunction.
•
Remove the battery when you are not using the
adapter.
Fluid leakage
can cause the adapter to
malfunction.
General Precautions
Handling Precautions
• If
the adapter is taken from a
cold environment
into a warm one, condensation may
develop
on
the outside surface and
internal
parts.
To
prevent
condensation
in
this case, first put the adapter into
an
airtight plastic
bag before taking it from a
cold
to warm environment. Then take out the adapter
after it has warmed gradually.
Do
the same when
taking the adapter from a warm environment into a
cold one.
Shooting Precautions
•
When using the power zoom, the lens will
stop
before the
limit
at both the wide and
telephoto
ends. The
available focal length range is
limited.
The
focal length
range where the power zoom can
be
used differs for each lens.
Refer to
"Materials"
on
Page 1
0
for
details.
•
Attaching the camera to a tripod may cause
interference with the adapter. If
this is the case,
please
use the
separately-sold TS-E
Lens Tripod
Adapter.
ENG-3