Need help?Do you have a question about the Canon varioPRINT 6000 TITAN Series and is the answer not in the manual?
Details on standard TITAN series, including speed, paper capacity, and supported accessories.
Details on TP TITAN series, wax toner, paper capacity, and applications.
Details on MICR TITAN series, magnetic toner, security printing, and applications.
Features of the PRISMAsync controller for workflow streamlining and automation.
Lists key standard features of the PRISMAsync controller like Remote Manager and PRISMAlytics Dashboard.
Highlights new features in PRISMAsync V8.5, including imposition, job edit, and security enhancements.
Outlines standard configurations for Standard, TP, and MICR TITAN series.
Introduces various input and output accessories available for the machine.
Lists optional input accessories such as Paper Input Modules and SheetFeeder.
Lists optional output accessories like stackers, finishers, and booklet makers.
Table detailing width, height, and depth for the main unit and accessories.
Table listing the weight of the main unit and various optional accessories.
Visual representations of minimum and large configuration dimensions and height requirements.
Floor space recommendations for Standard TITAN and TP/MICR TITAN large configurations.
Specifies the required floor strength (80 lb/ft²) for machine installation.
Details standard Ethernet and USB connectivity options.
Illustrates required power receptacles (NEMA types) for various components.
Table detailing power supply, receptacle, and cord length for each part.
Optimal temperature (62.6-82.4°F) and humidity (20-80% RH) for machine operation.
Importance of maintaining consistent temperature to avoid image issues.
Specifies required air exchange rate and room space for ventilation.
Recommends installation below 6,561.7' for optimal performance.
Details for the varioPRINT 6000 TITAN Series main unit, including engine, resolution, and security.
Specifications for paper input modules regarding capacity, size, weight, type, and options.
Specifications for the VP6000-A4 (T43) controller, including server type, memory, and features.
Specifications for the VP6000-A5 (C53) controller, including processor, memory, and features.
Details for the HCS 2.1, including paper capacity, dimensions, and weight.
Specifications for the Set Finisher, including paper capacity, stapling productivity, and dimensions.
Specifications for the PrintGuard IV post-fuser unit, including media support and dimensions.
Details on the MEM, its function for media handling, and compatibility notes.
Specifications for the LWM Kit, supported models, accessories, and media requirements.
Specifications for the inline punching unit, including die options, capacity, and durability.
Specifications for the BLM6200 booklet maker, including modes, paper sizes, and capacity.
Specifications for the BLM550+ booklet maker, including paper sizes, book thickness, and output capacity.
Specifications for the BLM6300 booklet maker, including paper sizes, booklet thickness, and output.
Specifications for the BGB3202 Perfect Binder, including binding method, book thickness, and throughput.
Details of the battery-powered lift for moving paper stacks.
Specifications for the SheetFeeder, including media support, paper weight, and throughput.
Specifications for the camera inspection system, including scan mode, resolution, and bar code capabilities.
Lists optional software licenses for the PRISMAsync controller.
Describes the PRISMAdirect workflow management solution for order intake and management.
Details PRISMAprepare software for advanced impositioning and document preparation.
Estimated installation and training times for minimum and full configurations.
Lists customer duties for equipment installation, site preparation, and environmental checks.
Explains benefits of the KOM program for customer satisfaction and control.
Outlines the two KOM training levels and responsibilities.
Details specific maintenance actions key operators can perform at different KOM levels.
Lists parts that key operators can replace, including quantities and remarks.
Covers general operator safety, including warnings about magnetic fields and personal safety.
Provides detailed guidelines for personal safety during operator maintenance.
Guidelines for safely powering down and working inside the machine.
Rules for safe use and maintenance of basic tools during operator maintenance.
Defines consumable parts and explains that their life expectancy varies and is not warranted.
Table showing estimated life expectancy (pages) for toner supplies based on coverage.
Compares optimum and maximum monthly print volumes and their impact on performance.
Describes expected printing speeds for simplex and duplex documents across paper sizes.
Table showing print speeds for the 6330 TITAN model at various quality settings.
Table showing print speeds for the 6270 TITAN model at various quality settings.
Table showing print speeds for the 6220 TITAN model at various quality settings.
Table showing print speeds for the 6180 TITAN model at various quality settings.
Discusses how mixed media and certain finishers can affect productivity.
Explains how to maintain productivity by managing paper and toner during operation.
Describes parameters for setting up media in the machine's library for optimal output.
Details adjustments for image position based on specific media types.
Covers advanced settings to address print quality issues, like low temperature mode.
Guidelines for proper paper storage and handling to ensure print quality.
Guidance on choosing appropriate media and using pre-printed media successfully.
Precautions for customers who cut their own paper to avoid dust and registration issues.
Explains how paper grain and curl affect machine reliability and print quality.
Table outlining customer and dealer responsibilities for installation and support actions.
To Next Page
General