1. Insert battery pack.
2. Set the on switch into the CAMERA position
3. Insert 1 or 2 SD cards into the slots.
4. If you need to format your SD card(s), press
the FUNC. button on the camera or on the
touchscreen, then press the MENU button on
the touchscreen to access the Menu Options.
From there, select the second submenu tab (the
film and gear icon) and scroll down to select
Initialize SD option. WARNING: initializing
your SD card will erase its contents, so
make sure you don’t need anything on
there before formatting!
5. Set the camera mode switch to M (manual).
6. Set the lens barrier switch to open.
7. Press the red record button to begin filming.
To Next Page
Need help?
General
