Need help?Do you have a question about the Canon XA50 and is the answer not in the manual?
General| LCD Screen | 3.0-inch Touch Panel LCD |
|---|---|
| Microphone Input | 3.5mm stereo mini jack |
| Headphone Output | 3.5mm stereo mini jack |
| Memory Card Slot | Dual SD card slots |
| Effective Pixels | Approx. 8.29 Megapixels |
| Lens | Canon 15x Optical Zoom Lens |
| ND Filter | Yes (1/4, 1/16, 1/64) |
| Focus System | Dual Pixel CMOS AF |
| Viewfinder | 0.24-inch OLED (Approx. 1.77 million dots) |
| Recording Format | MP4 (H.264/MPEG-4 AVC) |
| Resolution | 4K UHD (3840 x 2160), Full HD (1920 x 1080) |
| Audio Recording | Linear PCM (2ch) |
| Audio Input | 3.5mm stereo mini jack |
| Storage Media | SD/SDHC/SDXC memory card |
| HDMI Output | Yes |
| USB | USB Mini-B |
| Dimensions | 109 x 84 x 182 mm |
| Weight | Approx. 970g (excluding lens hood) |
| Image Stabilization | Optical image stabilizer system (Dynamic IS, Powered IS, and Auto mode) |
| Frame Rates | 3840 x 2160: 29.97p/23.98p/25p, 1920 x 1080: 59.94p/29.97p/23.98p/50p/25p |
High-performance camcorder with advanced sensor and image processor.
1.0-inch CMOS sensor with DIGIC DV 6 imaging platform for low-light performance.
Supports XF-AVC (MXF) and MP4 formats using MPEG-4 AVC/H.264 codec.
15x optical zoom lens with 25.5 mm wide-angle equivalent focal length.
Combines versatility with portability, featuring image stabilization and removable handle.
Focus/zoom ring, customizable buttons, and dials for intuitive operation.
Records in darkness using built-in infrared light.
Records 4K video in MP4 or XF-AVC on SD cards, with dual or relay recording.
Outputs time code for synchronization with external devices.
Advanced autofocus technology for improved focusing and face tracking.
Visual guide to check focus and required adjustments for sharp video.
Allows fast or slow motion effects and pre-recording.
Adjusts picture characteristics like color depth and sharpness for desired looks.
Allows geotagging of recordings with the GP-E2 GPS Receiver.
Enables professional-level remote operation with the RC-V100 controller.
Provides information on manual conventions and references for operation.
Explains symbols, terms, and icons used in the manual for clarity.
Critical warnings regarding data loss when ACCESS indicator is red.
Unauthorized recording of copyrighted material may infringe laws.
Notes on pixel variations and their effect on image quality.
Identifies external buttons, dials, and connectors on the camcorder body.
Identifies additional external buttons, dials, and connectors on the camcorder.
Identifies more external buttons, dials, and indicators on the camcorder.
Identifies external features and connections on the camcorder body.
Identifies tripod sockets and other mounting points on the camcorder.
Identifies controls and connections on the camcorder's handle unit.
Identifies parts of the microphone holder unit.
Identifies buttons and functions of the wireless controller.
Instructions for powering the camcorder using the adapter or battery.
How to attach the ferrite core to the power adapter cable.
Steps for charging the camcorder's battery pack.
Steps for attaching the handle unit, essential for certain functions.
Instructions for attaching the lens hood to reduce flare and protect the lens.
Adjusting the LCD panel for optimal viewing angle and brightness.
Adjusting the viewfinder position and diopter for comfortable use.
How to adjust the grip belt and attach optional straps for secure handling.
Instructions for inserting the battery and using the wireless controller.
How to switch the camcorder between CAMERA, MEDIA, and OFF modes.
Switching between AUTO and Manual shooting modes.
Procedure for setting the camcorder's date, time, and date format.
How to select the camcorder's display language from available options.
Setting the time zone for accurate timekeeping, with options for home/travel time.
Step-by-step guide to navigating and selecting options in the setup menus.
How to use the FUNC menu for quick access to shooting functions.
Lists compatible SD card types and speed requirements for recording.
Warnings regarding SD card fragmentation, speed, and SDXC card formatting.
Step-by-step instructions for inserting and removing SD cards.
How to format SD cards for first-time use or to delete data.
How to choose which SD card slot to use for recording clips and photos.
Explains dual recording for backup and relay recording for continuous filming.
Procedure to recover clips with corrupted data.
Basic steps for recording video clips and taking still photos.
How to operate the camcorder in AUTO and Manual modes for recording.
How to start and stop video recording using the REC button.
How to capture still photos using the PHOTO button.
Steps to properly stop recording and power down the camcorder.
How to review the last few seconds of a recorded clip.
Customizing file names for XF-AVC clips for better organization.
Explains the structure and components of XF-AVC file names.
Choosing between 'Reset' and 'Continuous' clip numbering.
Setting the starting reel and clip numbers for continuous recording.
Customizing a part of the file name with user-defined text.
Explanation of various icons and information shown on the camcorder screen.
Description of different AF frame types displayed during autofocus.
Icons and displays on the left side of the screen.
Icons and displays on the right side of the screen.
Icons and displays at the bottom and center of the screen.
How to choose between MP4 and XF-AVC video formats.
Setting the video resolution and bit rate for recordings.
Choosing the frame rate for video clips.
Table showing slow/fast motion rates for MP4 clips by resolution.
Table showing slow/fast motion rates for XF-AVC clips by resolution.
How to manually adjust focus using the focus/zoom ring.
Using the touch screen to select a focus point.
How to save and recall a specific focus position.
Overview of focus guide, peaking, and magnification features.
Visual guide to check focus and adjust it accurately.
Highlighting edges in focus for easier manual focusing.
How to use magnification to check focus in detail.
Combining manual focus with automatic adjustment for precise focus.
How to set the camcorder for continuous automatic focusing.
Adjusting the size and position of the AF frame for focus selection.
Settings for AF speed, response, and limitations.
How to activate and use face detection for focus and exposure.
Restricting autofocus to only detect and focus on faces.
How to use the focus/zoom ring to control zoom.
Operating the zoom rocker on the grip for zooming.
Adjusting variable or constant zoom speeds for the grip rocker.
Operating the zoom rocker on the handle unit.
Adjusting constant zoom speeds for the handle rocker.
Zoom speed variations with different remote controls.
Adjusting constant zoom speeds for the wireless controller.
Operating zoom directly from the camcorder's touch screen.
How to digitally enlarge the image using the tele-converter function.
Selecting between Standard IS and Dynamic IS modes.
How to activate and use the Powered IS image stabilization feature.
Setting a maximum gain value to limit noise in dark surroundings.
Overview of available shooting modes like Programmed AE, Shutter Priority, etc.
Using special scene modes for specific shooting situations.
Setting aperture, shutter speed, and gain manually for full exposure control.
Visual indicator for optimal and current exposure levels.
Camcorder auto-sets exposure, or user sets shutter/aperture priority.
Optimizing exposure by touching a specific point on the screen.
Locking current exposure settings even when reframing.
Adjusting exposure to darken or lighten the image manually.
Adjusting exposure to brighten dark areas caused by backlight.
Displaying zebra patterns to identify overexposed areas.
Using the ND filter to control aperture and depth of field in bright conditions.
Information on the ND warning icon and its causes.
Selecting white balance settings like Auto, Daylight, Tungsten, or Custom.
Adjusting the color temperature value manually.
Registering custom white balance settings for specific lighting conditions.
Applying preset looks or adjusting sharpness, contrast, and color depth.
Choosing between Preset and Regen time code modes.
Selecting Rec Run or Free Run modes for time code.
Setting the starting time code value.
Choosing between DF and NDF time code display styles.
Entering an 8-character hexadecimal code for user bit information.
Setting the user bit using the current date or time.
Choosing between AAC and LPCM audio formats for MP4 clips.
Table showing audio input combinations and recorded channels.
Instructions for connecting microphones and external audio devices.
Setting audio inputs for channels CH1/CH2.
Recording the same audio input to CH1 and CH2 simultaneously.
Selecting audio input for channels CH3/CH4.
Routing built-in mic or MIC terminal audio to CH1/CH2.
Overview of manual and automatic audio level adjustment.
Linking or separating audio adjustments for channels.
Manually adjusting audio levels for CH1/CH2 using dials.
Adjusting audio levels for CH3/CH4 or CH1/CH2 via the FUNC menu.
Settings for microphone sensitivity and attenuators.
Adjusting sensitivity and activating attenuators for external and built-in microphones.
Activating low-cut filter for microphones to reduce ambient noise.
Activating the attenuator for external microphones at the MIC terminal.
Supplying plug-in power to external microphones via the MIC terminal.
Adjusting the headphone volume for playback or monitoring.
Generating and selecting between SMPTE and ARIB color bars.
Outputting a 1 kHz audio reference signal at selected levels.
Activating pre-recording to capture footage before pressing REC.
How to activate infrared mode for recording in dark locations.
Steps to connect and select the RC-V100 or other remote controls.
Instructions for connecting and turning on the GP-E2 GPS receiver.
Setting the camcorder to sync date/time with GPS signals.
Assigning and using functions with the CUSTOM dial and button.
How to assign functions to physical and onscreen buttons.
List of functions that can be assigned to buttons and their descriptions.
How to save and load camcorder settings to/from an SD card.
Navigating and viewing recorded clips and photos in the index screen.
Selecting different index screens for clips, photos, or cards.
How to select and play back recorded clips and photos.
Warnings regarding playback of non-camcorder recorded files.
Onscreen controls for clip and photo playback.
How to adjust playback volume for headphones or speakers.
Viewing detailed information about a selected clip.
How to delete clips and photos from the index screen or individually.
Procedure for deleting single video clips or still photos.
How to trim MP4 clips by removing unwanted sections.
How to copy clips and photos between SD cards or individually.
How to copy a single photo to another location.
Settings for video output signals during recording.
Settings for video output signals during playback.
Illustrates connections for external monitors via HDMI and SDI.
How to output video signals via the SDI OUT terminal.
How to output video signals via the HDMI OUT terminal.
Changing the scan mode for interlaced scanning devices.
Details audio output formats for SDI OUT and HDMI OUT terminals.
Choosing which audio channels to output to headphones or speakers.
Selecting audio channels for output via the HDMI OUT terminal.
General guidance on saving clips to a computer.
Steps for copying clips from an SD card to a computer.
Using MP4 Join Tool to combine split MP4 clips.
Using Canon XF Utility for saving and organizing XF-AVC clips.
Plugin for importing clips into Avid Media Composer.
Overview of available menu items and their settings.
List of functions accessible via the FUNC menu in CAMERA mode.
List of functions accessible via the FUNC menu in MEDIA mode.
Details of the [v Camera Setup] menu options.
Details of other setup menu options like [Image Stabilizer].
Details of [É Playback Setup] and [Æ Recording Setup] menu options.
Details of [¡ Audio Setup] menu options.
Details of [£ Display Setup] menu options.
Details of [B System Setup] menu options.
Details of remaining setup menus like [GPS Information Display].
Troubleshooting steps for power-related problems.
Solutions for problems like REC button not working or focus issues.
Troubleshooting steps for playback and indicator issues.
Troubleshooting steps for playback problems like cannot delete/copy.
Troubleshooting for screen display, video noise, audio, and card problems.
Troubleshooting for remote, external device, and message issues.
Resolving issues with card initialization, recording, and card capacity.
Troubleshooting slow write speeds, unrecoverable clips, and photo transfer.
Problems with recognizing data or failed data recovery.
Risks of serious injury or death from misuse or product defects.
Risks of injury from product exposure to extreme temperatures.
Precautions for safe operation, storage, and handling of the camcorder.
Critical safety warnings for handling the battery pack.
Guidelines for storage, battery life, non-Canon packs, SD cards, and disposal.
Information on the built-in backup battery and its recharging.
Critical safety warnings for handling lithium button batteries.
Instructions for cleaning the camcorder body, lens, and LCD screen.
How condensation forms and how to avoid or deal with it.
Information on power sources for international use.
Details on recording systems, file formats, compression, and video configurations.
Details on media support, image sensor, LCD, viewfinder, and lens specifications.
Specifications for focus types and filter diameter.
Specs for white balance modes, illumination, stabilization, and photo file sizes.
Details of all camcorder terminals and power supply specifications.
Weight specifications and details for the compact power adapter.
Specifications for the compact power adapter.
Specifications for the BP-820 rechargeable battery pack.
Tables showing approximate recording times for MP4 and XF-AVC clips.
Approximate charging times and battery usage times for different conditions.
Details the limited warranty terms and conditions for products sold in the USA.
Details the limited warranty terms and conditions for products sold in Canada.
To Next Page
