EasyManuals Logo

Canon XA50 User Manual

Canon XA50
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
71
White Balance
White Balance
The camcorder uses an electronic white balance process to calibrate the picture and produce accurate colors
under different lighting conditions. This function can only be used when the shooting mode is set to , ,
or n.
1 Select [White Balance].
[FUNC] > [ * White Balance]
* Default option. The button will show the icon of the option currently in use.
2 Select the desired option and then select [X].
If you selected [ Color Temperature], [ Set 1] or [ Set 2] and wish to change the color temperature
value or register a new custom white balance, continue with the appropriate procedure below instead of
selecting [X].
The icon of the selected option will appear on the left of the screen.
To set the color temperature ([ Color Temperature])
3 Select [i].
An adjustment dial will appear on the screen.
4 Drag your finger along the dial to set the color temperature value.
5 Select [X].
To set a custom white balance ([ Set 1] or [ Set 2])
3 Point the camcorder at a gray card or white object so that it fills the frame at the center of the screen
and then select [
Å].
•When the Å icon inside the frame stops flashing, the procedure is completed. The setting is retained even
if you turn off the camcorder.
4 Select [X].
Options
NOTES
NOTES
When you select a custom white balance:
- Do not use the digital zoom range (light blue area of the zoom bar).
- Set the custom white balance again when the location, lighting or other conditions change.
- Very rarely and depending on the light source, Å may keep flashing. The result will still be better than with
[Automatic].
Operating modes:
[ Automatic]: The camcorder automatically sets the white balance for natural looking colors.
[¼ Daylight]: To record outdoors on a bright day.
[É Tungsten]: To record under tungsten and tungsten-type (3-wavelength) fluorescent lighting.
[ Color Temperature]:
Allows you to set the color temperature between 2,000 K and 15,000 K.
[ Set 1], [ Set 2]:
Use the custom white balance settings to make white subjects appear white under colored
lighting.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon XA50 and is the answer not in the manual?

Canon XA50 Specifications

General IconGeneral
LCD Screen3.0-inch Touch Panel LCD
Microphone Input3.5mm stereo mini jack
Headphone Output3.5mm stereo mini jack
Memory Card SlotDual SD card slots
Effective PixelsApprox. 8.29 Megapixels
LensCanon 15x Optical Zoom Lens
ND FilterYes (1/4, 1/16, 1/64)
Focus SystemDual Pixel CMOS AF
Viewfinder0.24-inch OLED (Approx. 1.77 million dots)
Recording FormatMP4 (H.264/MPEG-4 AVC)
Resolution4K UHD (3840 x 2160), Full HD (1920 x 1080)
Audio RecordingLinear PCM (2ch)
Audio Input3.5mm stereo mini jack
Storage MediaSD/SDHC/SDXC memory card
HDMI OutputYes
USBUSB Mini-B
Dimensions109 x 84 x 182 mm
WeightApprox. 970g (excluding lens hood)
Image StabilizationOptical image stabilizer system (Dynamic IS, Powered IS, and Auto mode)
Frame Rates3840 x 2160: 29.97p/23.98p/25p, 1920 x 1080: 59.94p/29.97p/23.98p/50p/25p

Related product manuals