Zooming
58
Setting the Zoom Speed of the Supplied Wireless Controller
Supplied wireless controller: Approximate zoom speeds (time required to zoom end-to-end)
* When the zoom speed is too fast, the camcorder may have more trouble focusing automatically while zooming.
1 Select the overall zoom speed level (step 1, A 56).
2 Select [Wireless Ctrlr Zoom Speed].
> [v " Camera Setup] > [Wireless Ctrlr Zoom Speed]
3 Select [Ï] or [Ð], or drag your finger along the adjustment bar, to set the desired constant speed.
4 Select [X].
Using the Touch Screen’s Zoom Controls
1 Open the onscreen zoom controls.
[FUNC] > [R Zoom]
• The zoom controls appear at the bottom the screen.
2 Touch the zoom controls to operate the zoom.
• Touch anywhere within the V area to zoom out or anywhere within the U
area to zoom in. Touch closer to the center for a slow zoom; touch closer
to the V/U icons for faster zooms.
3 Select [X].
Digital Tele-Converter
Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor of approx.
2 and record the enlarged image.
1 Select [Digital Zoom].
> [v ! Camera Setup] > [Digital Zoom]
2 Select [ Digital Tele-conv.] and then select [X].
3 Open the onscreen zoom controls.
[FUNC] > [R Zoom]
4 Select [ ] (digital tele-converter) and then select [X].
• The center of the screen will be enlarged approximately 2 times and the icon will appear on the left of
the screen.
• Select [ ] again before closing the screen to turn off the digital tele-converter.
[Wireless Ctrlr Zoom Speed] setting
[Zoom Speed Level] setting
[] Slow] [[ Normal] [Z Fast]
1 (slowest) 4 min. 38 sec. 2 min. 1 min.
16 (fastest) 4.2 sec. 2.6 sec. 1.5 sec.*
Operating modes:
To Next Page
