To Next PageTo Next PageWhy don't some/all of the digital effects work on my Canon zr10. Camcorder?
If some or all of the digital effects don’t work on your Canon Camcorder, it is because there are a number of restrictions on using the digital effects. Make sure that the camera is properly connected if you are using it with a TV or VCR.
Why is there a bright stripe on the screen of my Canon Camcorder?
If you notice a bright stripe on the screen of your Canon Camcorder, it could be because when recording in dark places a bright light in the scene may cause a vertical light bar (“smear”) to appear. Make sure that the camera is properly connected if you are using it with a TV or VCR.
Why does the cassette compartment stop mid-operation while loading/unloading a cassette in my Canon zr10. Camcorder?
If the cassette compartment stops mid-operation while loading/unloading a cassette in your Canon Camcorder, it may be because the battery pack’s power is exhausted. Recharge or change to a new battery pack.
What to do if the wireless controller doesn’t work with my Canon zr10. Camcorder?
If the wireless controller doesn’t work with your Canon Camcorder, the remote sensor mode may be set to OFFB in the menu, the remote sensor modes of the wireless controller and the camera itself may be different, or the batteries are dead or not inserted. Make sure that the camera is properly connected if you are using it with a TV or VCR.
Safety precautions regarding fire, shock, interference, and service.
Further safety guidelines covering lightning, power lines, servicing, and damage.
Step-by-step guide to connecting the camera to an AC power source.
Steps for attaching and charging the battery pack.
Steps for disconnecting and removing the battery pack after charging.
Step-by-step guide to inserting and removing a videocassette.
Actions required before starting a recording session.
Steps to start, pause, and stop the recording process.
Connecting via S-video input terminals for higher picture quality.
Connecting via standard audio/video input terminals.
List of available settings and functions within the camera menu.
Overview of VCR menu items and the process for selecting settings.
Procedures for locking exposure and manually adjusting brightness.
Procedures for locking focus and manually adjusting sharpness.
Step-by-step process for executing A/V insert editing using the wireless controller.
Steps for performing audio dubbing using the camera's controls or remote.
Further solutions for recording, playback, digital effects, and button issues.
General
