This document provides assembly instructions for a Canopy C. King Bed. It outlines the steps required to construct the bed frame, including attaching various components and securing them with the provided hardware.
Function Description
The Canopy C. King Bed is a large bed frame designed to support a mattress and box spring, featuring a canopy structure. The bed frame provides a sturdy and elevated platform for sleeping, and the canopy design allows for decorative elements or drapes to be added.
Important Technical Specifications
The bed assembly requires various components and hardware, categorized into different boxes:
Box #1 (Headboard Components):
- A. Upper Headboard Support: Connects to the upper part of the headboard.
- B. Lower Headboard Support: Connects to the lower part of the headboard.
- C. Headboard Panel: The main decorative panel of the headboard.
- D. Upper Footboard Support: Connects to the upper part of the footboard.
- E. Footboard Panel: The main decorative panel of the footboard.
- F. Slat Roll: A series of wooden slats designed to support the mattress.
Box #2 (Vertical Posts):
- G1. Left Vertical Headboard Post: The main vertical support for the left side of the headboard.
- G2. Right Vertical Headboard Post: The main vertical support for the right side of the headboard.
- H1. Left Vertical Footboard Post: The main vertical support for the left side of the footboard.
- H2. Right Vertical Footboard Post: The main vertical support for the right side of the footboard.
Box #3 (Side Rails and Canopy Rails):
- I. Side Rail: Connects the headboard and footboard, forming the sides of the bed frame.
- J. Center Slat Support Leg: Provides additional support for the center of the slat roll.
- K. Center Slat Support: Connects the center slat support leg to the slat roll.
- L. Canopy Rail: Forms the upper structure of the canopy.
Hardware Packed in Box #3:
The assembly requires specific hardware:
- 1. Allen Bolt (M8X50): 16 pieces, used for connecting major components.
- 2. Allen Bolt (M8X40): 4 pieces, used for connecting major components.
- 3. Allen Bolt (M8X20): 4 pieces, used for connecting major components.
- 4. Spring Washer (M8): 24 pieces, used with bolts to prevent loosening.
- 5. Flat Washer (M8): 24 pieces, used with bolts to distribute pressure.
- 6. Wood Screw (M4X30): 31 pieces, used for securing wooden components.
- 7. Allen Key: 1 piece, the primary tool for tightening Allen bolts.
Tool Required:
- Phillips Head Screw Driver and Ladder (not provided).
Usage Features
The assembly process is divided into seven steps, emphasizing safety and correct component placement.
Important Note: It is crucial to have a second person for assembly to ensure safety and ease of handling large components. All bolts should be tightened completely only after all pieces are connected.
Step 1: Headboard Assembly
- Connect the Headboard Panel (C) to the left (G1) and right (G2) vertical headboard posts.
- Use four M8X50 Allen bolts (1), spring washers (4), and flat washers (5).
- Only finger-tighten the bolts initially.
- Attach the Lower Headboard Support (B) to the headboard assembly using four M8X50 Allen bolts (1), spring washers, and flat washers.
- Tighten all bolts, including the previous four, completely with the provided Allen key (7).
Step 2: Footboard Assembly
- Connect the Footboard Panel (E) to the left (H1) and right (H2) vertical footboard posts.
- Use four M8X50 Allen bolts (1), spring washers (4), and flat washers (5).
- Tighten completely with the Allen key.
Step 3: Connecting Side Rails
- With the help of a second person, connect the headboard (Step 1) and footboard (Step 2) assemblies to the side rails (I).
- Connect the top side rail bracket with one M8X20 Allen bolt (3), spring washer, and flat washer.
- Connect the bottom side rail bracket with one M8X50 Allen bolt (1), spring washer, and flat washer.
- Do not tighten completely until both ends of each side rail have been attached.
- Once all pieces are connected, tighten all bolts with the Allen key.
Step 4: Attaching Canopy Rails and Upper Supports
- Using a step ladder (not included), connect the Upper Headboard Support (A) and Upper Footboard Support (D).
- Then, connect the Canopy Rails (L) to the vertical headboard and footboard posts.
- Once supports and rails are in place, secure the components with four M8X40 Allen bolts (2), spring washers, and flat washers.
- Tighten all bolts with the Allen key.
Step 5: Attaching Center Slat Support Legs
- Attach the Center Slat Support Legs (K) to the Center Slat Support (J).
Step 6: Connecting Center Slat Support Assembly
- Connect the Center Slat Support Assembly (Step 5) to the slat cleat attachments on the headboard and footboard.
- Secure the slat support to the bed using two wood screws (6).
Step 7: Attaching Slat Roll
- Attach the Slat Roll (F) to the bed assembly as shown, and secure with wood screws (6).
Maintenance Features
Instructions for Adjusting Leveler:
The bed includes levelers to ensure stability on uneven surfaces.
- Position the bed: Place the bed in your space and locate the leveler under each support leg.
- Turn the leveler: Turn the leveler counter-clockwise to extend it and clockwise to retract it.
- Adjust each leveler: Adjust each leveler until equal, upward pressure is applied on the support slat.
Maintenance Instructions:
- Remove mattress and box spring: If applicable, remove your mattress and box spring before moving your bed.
- Lift bed when moving: Lift your bed when moving it; dragging can damage the supports.
- Re-adjust levelers: Re-adjust the levelers after moving your bed to ensure stability.
To Next Page
Need help?
General
