EasyManua.ls Logo

Cantrack G06L - Function of Remote Controller (Optional ); Alarm Sound Via Speaker in Arming State

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
11. Function of Remote Controller (optional )
Button
Function
Description
ARM
Press for 1 time, siren will beep 1 time
Long press button cut engine, siren will beep 3 times
DISARM
Press for 1 time, siren will beep 2 times
Long press button resume engine, siren will beep 4 times
SOS
Press for 3s, tracker will send SOS alert to admin
phone number.
Deterrence/car
search
Press for 3s when it is in arm state, siren will beep
10s, press disarm button to quit.
12. Alarm sound via speaker in arming state
1) ACC (Ignition) alarm
Tracker will send “ACC alarm + latitude / longitude” to authorized numbers
every 3 minutes if the ignition of the vehicle has been switched “ON” (Key is
rotated to “ACC ON” position when tracker works in arming state. The siren
will beep for 20 seconds, and if the ignition is still on, then the siren will beep
for another 20 seconds with 20 seconds pause, disarming to quite the alarm.
2) Vibration Alarm
There is a built-in three axis acceleration sensor in the tracker to detect the