EasyManua.ls Logo

Canvas Abbotsford 064-4015-0 - User Manual

Canvas Abbotsford 064-4015-0
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
60” ABBOTSFORD MEDIA FIREPLACE
MODEL NO. 064-4015-0
FAUX STONE SURROUND
WOOD SURROUND
OR
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
Question and Answer IconNeed help?

Do you have a question about the Canvas Abbotsford 064-4015-0 and is the answer not in the manual?

Summary

SAFETY INFORMATION

General Safety Precautions

Read and follow all safety instructions before assembly and operation.

Electrical Safety and Cord Handling

Ensure proper grounding, avoid extension cords, and handle cords safely.

Safe Usage and Handling Guidelines

Handle appliance with care, keep combustibles away, and note usage warnings.

TOOLS REQUIRED

PARTS LIST

Main Components Identification

List of primary parts for the fireplace and surround assembly.

Hardware and Optional Parts

List of hardware items, accessories, and optional wood surround parts.

ASSEMBLY GUIDE

Assembly Options

Choose between Faux Stone or Wood surrounds for fireplace assembly.

Step 1: Prepare Top and Side Panels

Securely screw cam bolts into top and lower side panels.

Step 2: Prepare Shelves and Mouldings

Insert cam bolts into middle shelf, bottom panel, and mouldings.

Step 3: Insert Wood Dowels

Glue wood dowels into the bottom panel and lower side panels.

Step 4: Attach Bottom Stretchers;Crossbars

Attach bottom front/rear stretchers and crossbars using wood dowels.

Step 5: Connect Middle Shelf to Crossbar

Attach middle crossbar to middle shelf using cam locks.

Steps 6-9: Assemble Base Frame

Assemble base frame by attaching stoppers, stretchers, side panels.

Steps 10-14: Lower Partition Assembly

Assemble lower partition panels, stiles, and mouldings.

Steps 15-22: Upper Frame and Panel Assembly

Assemble middle shelf, upper panels, and top panel.

Steps 23-28: Finishing Touches

Reinforce structure, install back panels, doors, shelves, conceal hardware.

Steps 29-30: Fireplace Insert Installation

Install the fireplace insert and its trims.

Steps 31-32: Final Setup and Safety

Apply stopper, position unit, install restraint hardware, and note TV load limits.

OPERATING INSTRUCTIONS

Control Panel Identification

Identify control panel buttons and operate the main power.

Heater Control Function

Operate the heat function and understand its behavior with power cycles.

Flame Control Adjustment

Adjust flame brightness and appearance levels using the flame button.

Remote Control Battery Replacement

Replace the battery in the remote control following step-by-step instructions.

Remote Control Operation and Battery Safety

Operate remote and follow battery safety warnings.

CLEANING AND MAINTENANCE

Used Battery Disposal

Properly dispose of used batteries as hazardous waste for recycling.

Cleaning Procedures

Clean metal trim and vents safely when the unit is off and cool.

TROUBLESHOOTING

Power and Unit Operation Issues

Address power circuit tripping, unit not turning on, and heater issues.

Remote Control Problems

Resolve problems with the remote control not working.

WARRANTY INFORMATION

Canvas Abbotsford 064-4015-0 Specifications

General IconGeneral
ModelCanvas Abbotsford 064-4015-0
CategoryIndoor Fireplace
Fuel TypeElectric
Heating AreaUp to 400 sq. ft.
Voltage120V
Power Consumption1500W
Wattage1500W
Flame EffectYes
Remote ControlYes
ThermostatYes
Adjustable FlameYes
Adjustable ThermostatYes
TimerYes