Need help?Do you have a question about the Canyon GRAIL R119 and is the answer not in the manual?
Lists items provided in the box.
Lists items not provided but required for assembly.
Illustrates torque application and torque values for components.
Indicates the maximum weight capacity of the bike.
Illustrates initial unpacking steps.
Shows removal of the upper protective layers.
Depicts accessing the front wheel packaging.
Depicts accessing the rear wheel packaging.
Shows removal of frame protection materials.
Illustrates lifting the bike out of the box.
Shows inserting the top cap onto the steerer tube.
Demonstrates applying assembly paste to carbon components.
Illustrates attaching the handlebar to the stem.
Shows tightening stem bolts with a torque wrench.
Depicts achieving correct torque for stem bolts.
Details attaching brake levers and their torque settings.
Shows greasing the frame dropouts.
Illustrates routing the chain onto the cassette.
Depicts installing the rear wheel into the frame.
Shows tightening the rear wheel axle with torque.
Advises keeping the brake system clean.
Illustrates installing the front wheel into the fork.
Shows tightening the front wheel axle with torque.
Shows initial engagement of the RWS lever.
Demonstrates checking for proper lever engagement.
Illustrates adjusting the lever's position and torque.
Shows verifying the lever adjustment.
Depicts confirmation of a secure lever fit.
Shows applying assembly paste to the seatpost.
Illustrates torque specification for the seatpost clamp.
Indicates minimum and maximum seatpost insertion marks.
Shows tightening the seatpost with a T25 tool.
Shows greasing pedal threads before installation.
Depicts installing the left pedal, noting its thread direction.
Depicts installing the right pedal, noting its thread direction.
Illustrates tightening pedals to the correct torque.
Shows adjusting the saddle clamp with a 5mm tool.
Illustrates adjusting the saddle's tilt (angle).
Depicts tightening the saddle clamp to the correct torque.
Details compatibility for carbon rails and clamp sets.
Emphasizes cleaning the seatpost before adjustment.
Shows minimum and maximum height marks on the seatpost.
Illustrates tightening the seatpost clamp to the correct torque.
Verifies wheel fastening, pedals, bolts, and nuts.
Ensures the bike operates correctly.
Inspects bike, tyres, and components for fatigue.
Checks brake system for dirt and grease.
Inspects brake pads for wear.
Verifies tyre pressure and valve stem alignment.
Refers to user manual for bike category and intended use.
Inspects and lubricates the bicycle chain.
Advises wearing tight clothing to avoid entanglement.
Directs users to the manual for further details.
Covers inspection, wet/dry cleaning, and surface sealing.
Includes checking measurements and adjusting components.
Details greasing and lubricating various components.
Covers checking bearing play and for cracks in parts.
Advises on using bike cleaner and retightening fasteners.
Advises using assembly paste and consulting a mechanic.
Highlights warnings about correct torque and high-pressure cleaners.
Shows cleaning the entire bike.
Illustrates cleaning the bicycle drivetrain.
Focuses on inspecting drivetrain components and torque.
Covers inspection of spokes and hubs.
Details headset bearing checks and torque.
Covers maintenance for pedals, crank, and bottom bracket.
Advises on inspecting tyres and rims.
Describes how to check for chain wear.
Covers inspection of bicycle cables.
Details care for surfaces and carbon parts.
Details annual seatpost maintenance.
Covers torque checks for attached components.
Focuses on cockpit and handlebar tape maintenance.
Information on the storage compartment (R120 & R121).
Shows mounting points for accessories.
Details mounting points for fenders.
Details the cockpit extension for specific models.
Information on mounting fenders for R119.
Covers load carriers and fork sleeves.
Points to exploded view drawings for component identification.
To Next Page
General