Instruction manual CM465
Please keep this instruction manual for future reference
14
IMPORTANT!
Always completely extract the drip tray, to avoid it falling when removing
the grounds container. Empty the grounds container and clean thoroughly,
making sure all residues deposited on the bottom are removed.
Every time you pull the drip tray out, the waste coffee container must also
be emptied, even if it is not completely full. If this process is not carried
out, the waste coffee container may overfill when coffee is made and the
machine may get blocked.
Never remove the water tank when the appliance is dispensing coffee.
Otherwise, the appliance will not be able to make the coffee. If the
appliance malfunctions, do not contact Caple service straight away, first
look at the troubleshooting guide. If this does not help, contact Caple
customer service.
Changing the quantity of coffee:
The appliance is factory preset to automatically deliver the following quantities of
coffee:
- ESPRESSO CUP;
- SMALL CUP;
- MEDIUM CUP;
- LARGE CUP;
- MUG.
To change these quantities, proceed as follows:
1. Press the touch key ‘MENU‘ (2) and press the ‘Scroll’ touch keys (5 and 7) until
the menu option “PROGRAM COFFEE” appears.
Confirm the menu option with the touch key ‘OK’ (9).
2. Select the cup size you want to change with the scrolling touch keys (5 and 7).
When the desired cup size is displayed, confirm it with the touch key ‘OK’ (9).
3. A bar appears on the display, which can be made bigger or smaller; this
represents the cup filling quantity. A different quantity can be selected using the
scrolling touch keys (5 and 7) in 10 steps. A full bar indicates that the maximum
cup filling quantity of 220ml is selected.
CM465 Coffee Machine Instruction manual.indd 14 17/08/2017 13:59
To Next Page
Loading...
