Instruction manual CM46518 Please keep this instruction manual for future reference
The machine is set by default to automatically delivery 150ml of hot
water. To change these quantities, proceed as follows:
1. Place a container underneath the water spout.
2. Press the touch key ‘MENU’(2) to enter the menu
3. Press the Scroll touch keys (5 and 7) until “PROGRAM HOT WATER”
is displayed.
4. Press the touch key ‘OK’ (9) to conrm.
5. Select the required quantity of water by pressing scroll touch keys (5
and 7). The progress bar shows the quantity of water selected.
6. Press the touch key ‘OK’ (9) to conrm (or the ‘Return’ touch key (3) to
cancel the operation.
7. Press the ‘Return’ touch key (3) to exit the menu.
8. The appliance is now reprogrammed with the new settings and
is ready.
MAKING CAPPUCCINO
The machine is set by default to automatically delivery a standard
cappuccino.
1. Select the taste of the coffee you want to use to make the cappuccino
by pressing the ‘Coffee strength’ touch key (6).
2. Remove the lid of the milk container.
3. Fill the container with about 100ml of milk for each cappuccino to be
prepared. Never exceed the MAX level (corresponding to about 750ml)
marked on the container. You should ideally use skimmed or semi
skimmed milk at refrigerator temperature (about 5°C).
4. Make sure the intake tube is correctly inserted in the rubber washer.
Then replace the milk container lid.
1.
2.
3. ml
4.
5.
6.
7.
8.
22
1
CHANGING THE QUANTITY OF HOT WATER
To Next Page
Loading...
