Instruction manual CM46534 Please keep this instruction manual for future reference
A
B
7. Once inserted, make sure the two coloured buttons have snapped back
out, otherwise the service door cannot be closed.
› The two coloured buttons are correctly snapped out (A).
› The two coloured buttons are not snapped out (B).
8. Replace the drip tray and waste coffee container.
9. Close the service door.
NOTES:
If the brewing unit is not put in place correctly, the service door cannot be
closed.
If it is difcult to insert the brewing unit, it must be made into the right
height (before inserting) by pressing the brewing unit rmly together from
top and bottom.
If it is still difcult to insert the brewing unit:
› Leave it out of the appliance, place the drip tray, close the service
door, switch the main switch on the back of the appliance to ‘off’
and then to ‘on’ again.
› Wait for all the lights to go off, then open the door, remove the
drip tray and replace the brewing unit.
› Replace the drip tray, together with the grounds container.
› Close the service door.
To Next Page
Loading...
