EasyManua.ls Logo

Caple CM465BG - Page 35

Caple CM465BG
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Please keep this instruction manual for future reference Instruction manual CM465
1 CAPPUCCINO
2 CAFFELATTE
S
M
CLEANING THE MILK CONTAINER
Always clean the tubes inside the milk container when you prepare milk.
If there is still milk in the container, do not leave it out of the refrigerator
for longer than strictly necessary. Clean the container each time you
prepare milk as described in the section “Making cappuccino”.
All components can be washed in a dishwasher, placing them
in the top basket of the dishwasher.
1. Turn the milk container lid clockwise then remove it.
2. Remove the milk spout (S) and intake tube (M).
3. Remove the frothed milk regulator (F) by pulling it outwards.
4. Wash all the components thoroughly with hot water and mild
washing-up liquid. Make sure there are no milk residues left inside
the holes (H) and the groove (G) on the  ne end of the frothed milk
regulator (F).
5. Check that the intake tube and spout are not clogged with milk
residues.
6. Replace the frothed milk regulator, milk spout and intake tube.
7. Replace the milk container lid.
CLEANING THE NOZZLES
Clean the nozzles on the milk container every time after heating milk or
making cappuccino. Otherwise, remains of milk may set hard.
Place a container under the milk dispenser pipe and press on the
CLEAN button (N3) on the milk container for at least 5 seconds. The
display shows “CLEANING!”
WARNING
Risk of scalding from steam and hot water escaping from the milk
dispenser pipe.
G
F
H
H
N3

Related product manuals