Instruction manual DD610BK
45
Please keep this instruction manual for future reference
INSTALLATION
IMPORTANT INFORMATION:
› Remove any transverse strips underneath the worktop at least in the area of the
worktop cut-out.
› When installing the appliance on top of a drawer it is essential to ensure that no sharp
items are stored in the drawer since these could become bent on the underside of the hob
and prevent the drawer from being opened and closed.
› If a shelf has been inserted underneath the hob, there must be a clearance of at least 20mm
to the underside of the hob in order to ensure that the hob is sufficiently ventilated.
› To avoid danger of fire, make sure that no combustible objects which could easily catch fire
or become deformed on exposure to heat are directly next to or under the surface.
SEALING OF THE HOB
Before installation, correctly insert the sealing unit
delivered with the hob.
› No liquids may penetrate between the edge of the hob and the worktop or between the hob
and the wall and come into contact with any electrical appliances.
› When installing a hob into an uneven worktop, e.g. with a ceramic or similar covering (tiles
etc.), the seal on the hob is to be removed and the seal between the hob and worktop made
with plastic sealing materials (putty).
› The hob must under no circumstances be sealed with silicone sealant. This would make it
impossible to remove the hob at a later date without damaging it.
To Next Page
Loading...