Caple PH501E - Troubleshooting

Instruction manual PH501E
Please keep this instruction manual for future reference
14
TROUBLESHOOTING
Fan does not run on any switch setting.
- Check the power supply is switched ON.
- Check fuse in fused spur.
- Check the breaker in the main fuse box
- Check the wiring connections at the fused spur.
Overheat protection switch has activated.
- Switch off the power at the fused spur
- Leave the unit to cool down for 5 mins
- Check the unit for any build up of dust or fluff and clean
with a vacuum cleaner if required
- Once cooled down switch on power supply and retry.
NOTE:
If a problem still persists please conctact Caple Service 0117 938 7420 or service@
caple.co.uk.
PH501E Instruction manual.indd 14 16/07/2018 13:44