Instruction manual WD140SS
12
12
Instruction manual WD140SS
12
Please keep this instruction manual for future reference
TROUBLESHOOTING
Repair of electrical appliances is to be carried only by qualified, authorised service agents.
Improperly or incorrectly performed repairs may create further hazards for the safety of the user.
Various factors affect heating time, for example:
Material and thickness of dishes, size of load, arrangement of load, temperature setting. Optimal
heating times for dishes are subjective. Therefore, it is advisable to determine them on a trial and
error basis according to your own preferences.
TROUBLES SOLUTION
If the dishes are not warm enough
The appliance is on
The right temperature has been set
The heat outlets have been covered by large plates or bowls
The dishes have been heated for a sufficient period of time.
If the dishes do not get warm
There is fan noise: the fan is working, but the heating element might be
defective
If the fan is not working, it may be defective
The main switch of the electrical system is off.
The electrical power cord is unplugged or damaged
If the dishes overheat: The temperature setting device may be defective
The on/off switch does not light up
when th appliance is switched on:
The control light of the switch is dfective
If the problem still persists, please contact Caple service for assistance:
T - 0117 938 7420
E - service@caple.co.uk
WD140SS Sense warming drawer Instruction manual.indd 12 28/05/2019 15:24
To Next Page
Loading...