Instruction manual WD140SS
8
8
Instruction manual WD140SS
8
Please keep this instruction manual for future reference
ELECTRICAL CONNECTION
CONTACT A QUALIFIED ELECTRICIAN FOR THE ELECTRICAL CONNECTION
OF THIS PRODUCT
Before connecting the appliance to the electrical mains, ensure that the technical data (voltage: V
and frequency: Hz ) indicated on the rating plate concur with those of the electrical mains.
This appliance has a 3amp fuse rating.
If in doubt, contact a qualified electrician.
If the plug is disconnected from the electrical power cord, a qualified electrician will be required
to insert and connect the appliance. Contact a qualified technician who is knowledgeable of local
standards and of any additional regulations issued by the local electric company and who ensures
that work is carried out in compliance with these standards.
IMPORTANT:
Check that the appliance is correctly connected to an approved earth wire to ensure
electrical safely. If necessary, have the system checked by a qualified electrician. If the electrical
outlet is no longer accessible after insertion, or if a fixed connection is to be made, the installer
must provide a separation device for each pole.
Valid separation devices include switches with a contact opening of at least 3mm. Caple shall not
be held liable for damage to individuals or property due to lack or interruption of the earth wire.
ATTENTION: EARTH CONNECTION IS REQUIRED BY LAW.
If the appliance is connected to the mains with an extension cord. Make sure that the extension
cord and the connection are insulated against humidity.
Never open the covering of the appliance if you come into contact with wires that carry voltage
or if you modify the electrical and mechanical structure of the appliance , it is possible that the
appliance will malfunction during operation.
WD140SS Sense warming drawer Instruction manual.indd 8 28/05/2019 15:24
To Next Page
Loading...