Instruction manual WD290BK
Please keep this instruction manual for future reference
13
INSTALLATION
Safety instructions for installation
Before connecting the appliance to the electrical mains, compare the connection
data (voltage and fraquency) indicated on the rating plate with the data of the
electrical mains.
The data must match, otherwise the appliance may be damaged.
If in doubt, contact a qualified technician.
Make sure that the electrical outlet is easily accessible even after the appliance has
been inserted. The warming drawer can only be inserted with other appliances with
a maximum weight of 40 kg that are provided with adequate cooling ventilation.
For installation with combination appliances, follow the instruction and building in
dimensions shown in the ‘Installation dimensions’ section.
Insertion and installation of this appliance may be performed by qualified personnel
who ensure safe operating conditions.
The dimensions of the housing are obtained from the size of the warmer drawer
plus measurements of the appliance combined with it.
Installation instructions
- Install the warming drawer directly onto a shelf within the cabinet to support the
appliance.
- The combined appliance i.e. oven, is then positioned directly onto the warming
drawer without the need for additional shelves.
- Ensure the warming drawer is well centred and aligned in the cabinet.
- Open the drawer and secure to the housing unit by inserting the 2 screws provided
into the fixing holes.
WD290BK Sense warming drawer Instruction manual.indd 13 03/10/2018 12:54
To Next Page
Loading...
