EasyManua.ls Logo

Caple WDU050 - Care and Maintenance; Motor Lubrication and Self-Cleaning; Cleaning Agent Restrictions and Splash Guard; Troubleshooting Tips

Caple WDU050
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21Instruction manual WDU050Please keep this instruction manual for future reference
CARE AND MAINTENANCE
THE MOTOR IS PERMANENTLY LUBRICATED FOR LIFE. DO NOT ATTEMPT TO LUBRICATE
YOUR DISPOSER.
The disposer is self cleaning and scours itself with each use.
NEVER put bleach or chemical cleaners into the disposer, as they cause serious corrosion of
metal parts.
Your disposer is equipped with a removable splash guard for ease of cleaning or
replacement. Remove the splash guard by pulling it out from the top. To replace, insert into
the sink flange and push down until it is properly seated.
If an odour develops, run orange or lemon rinds through the disposer. A dozen ice cubes
sprinkled with a little household scouring powder will also work.
TROUBLESHOOTING TIPS
BEFORE CALLING CAPLE SERVICE
Review the below chart before contacting Caple Service as you may find a simple solution,
saving you both time and money.
SAFETY NOTE
Before investigating any possible issues you MUST disconnect the power supply.
WARNING
Before resetting, disconnect the power supply, please see SAFETY NOTE above. The overload
control prevents the motor from operating should overloading occur. This feature protects your
house wiring and your disposer. When overloaded, the motor will stop automatically.

Related product manuals