To Next PageTo Next Page
Need help?Do you have a question about the caprari HVX Series and is the answer not in the manual?
Explains symbols used in the manual for safety and warnings.
Provides initial checks and guidance on handling documentation.
Illustrates the information found on the electric pump's data plate.
Details the information presented on the electric motor's data plate.
Explains the coding system used for electric pump models.
Provides critical warnings for safe product operation and potential voiding of warranty.
Describes the electric pumps' design, construction, and acoustic characteristics.
Outlines the standard applications for which the product is designed.
Lists specific uses that are not recommended or are forbidden for the product.
Details essential checks to be performed before assembly and installation.
Covers necessary considerations regarding the installation environment and features.
Provides instructions for assembling the pump and motor units and mounting.
Explains how to connect the pump's suction and delivery ports.
Guides on electrical connection procedures, safety, and voltage considerations.
Details the necessary steps for priming and starting the pump correctly.
Outlines routine conduction and inspection procedures for regular operation.
Covers procedures for ordinary and extraordinary maintenance and spare parts ordering.
Provides guidance on how to handle the pump during periods of inactivity.
Lists probable causes and remedies when the electric pump does not start.
Addresses issues related to fuses blowing during the startup process.
Provides solutions for overload relay activation shortly after starting.
Offers remedies for overload relay activation after a short period of operation.
Details common causes and solutions for reduced pump flow rate.
Explains why the pump might deliver no water despite operating.
Addresses causes of excessive noise and vibration during pump operation.
Lists reasons why the pump might not stop as expected.
Covers causes and remedies for leaks from the hydraulic seal.
General| Series | HVX |
|---|---|
| Maximum Working Pressure | 16 bar |
| Pump Casing Material | Cast iron, stainless steel |
| Liquid Temperature | Up to 120 °C |
| Impeller Material | Bronze, stainless steel |
| Flange Standard | ANSI |
| Material | Bronze |
| Frequency | 50 Hz / 60 Hz |
| Protection Class | IP55 |
| Application | Water distribution, irrigation, industrial applications |
