To Next PageTo Next Page
Need help?Do you have a question about the Capron V66 and is the answer not in the manual?
Contains fields for vehicle and customer data, and dealer stamp.
Covers avoidance of fire risks, fire-fighting procedures, and actions in case of fire.
Details essential checks and precautions before and during journeys for safe road operation.
Provides general instructions and safety advice for the vehicle's gas system.
Covers safety instructions for working on the vehicle's electrical system.
Instructions for initial vehicle start-up, including key management and wheel bolt checks.
Explains the concept of payload and its importance for vehicle safety and handling.
Details how payload is composed of conventional, additional, and personal equipment.
Provides a step-by-step guide to calculating the vehicle's payload, including a formula.
Gives detailed instructions on how to distribute load evenly for safety and optimal driving characteristics.
Presents a comprehensive checklist to be completed before commencing the journey.
Covers fundamental driving practices, seat belt usage, door locking, and handling specific conditions like ferries.
Emphasizes adjusting driving speed to conditions, considering wind, loading, and legal limits.
Stresses the importance of immediate repair for brake defects and pre-journey brake checks.
Details general rules for seat belt usage, including fastening, maintenance, and child restraints.
Guides on proper seat belt positioning and tautness for maximum effectiveness.
Provides instructions and warnings regarding the use of child restraint systems, including ISOFIX and airbags.
Explains the correct installation and usage of ISOFIX systems, including safety precautions.
Details how to use ISOFIX systems with additional attachable seats.
Specifies which seats are permitted for travel and the importance of seat belts, referencing warning stickers.
Covers general safety regarding doors and refers to base vehicle manuals for specific door operation.
Covers the operation of windows, blinds, insect screens, and general advice on condensation.
Provides safety information, load limits, and instructions for using the access ladder and safety net for the overcab bed.
Covers safety, load limits, operation, and precautions for the pull-down bed, including fire hazards.
Covers safety, load limits, and conversion of the bunk bed to a rear garage.
Details the steps for converting the central seating group into a bed foundation.
Provides detailed instructions for converting the front bench seat with divan into a sleeping area.
Outlines the steps for converting the front bench seat with a lengthwise seat into a sleeping area.
Explains how to convert the front bench seat into a guest bed.
Provides essential general instructions and safety precautions for operating and maintaining the gas system.
Details safe handling, transport, connection, and usage of gas bottles, including pressure regulators and ventilation.
Provides a step-by-step guide for safely changing gas bottles, including leak checks.
Explains the function and operation of gas isolator taps for individual appliances.
Covers essential safety rules for the electrical system, including qualified personnel and protection during storms.
Details how the 12V power supply operates, including battery management and switching off appliances.
Covers safety, maintenance, charging, position, and discharging of the living area battery.
Explains how batteries are charged via a 230V supply, including automatic charging and switching off appliances.
Describes how the vehicle engine's alternator charges the batteries and the automatic disconnection.
Explains the function of the charging booster and safety warnings related to its operation.
Introduces the transformer/rectifier (EBL 31), its installation position, and general warnings.
Details the multiple functions of the transformer/rectifier, including battery charging and circuit distribution.
Explains how to switch the battery cut-off on and off to disconnect 12V appliances.
Warns about incorrect settings of the battery selector switch and the risks involved.
Describes how the battery monitor indicates voltage levels and the measures to take when voltage is low.
Explains how the battery is charged when the engine is running or connected to 230V.
Introduces the LT 100 control panel and its numbered indicators and buttons.
Explains the function of the 12V main switch for powering the living area and the exceptions.
Covers safety for working on the 230V system and general information about its components.
Explains how to test the fault current protection switch (FI-switch) for proper function.
Covers safety rules for replacing fuses and the types of fuses used.
Provides essential safety instructions for the heater/boiler regarding gas operation and water temperature.
Details operating modes (winter/summer) and controls for the Truma Combi heater and hot water production.
Introduces the digital operating unit for hot-air heaters and boilers, covering its sections and initial operation.
Explains the function of the safety/drainage valve for preventing frost damage and how to fill/empty the domestic water container.
Covers general safety and operation of the gas cooker, including fire hazards and ventilation.
Provides detailed instructions for operating the gas cooker, including ignition, flame protection, and safety precautions.
Covers safety and operational instructions for the gas oven with grill, including first-time use.
Discusses refrigerator operation during travel and when leaving the vehicle, including ventilation grills.
Details the refrigerator's 3 operating modes (Gas, 230V, 12V) and setting the cooling power.
Provides general instructions for water supply, including filling the tank, hygiene, and frost protection.
Provides a detailed procedure for emptying and ventilating the water system to prevent frost damage.
Provides a step-by-step guide for safely removing and emptying the sewage tank.
Details the process for cleaning water pipes using approved cleaning agents and proper disposal.
Explains how to disinfect the water system using suitable disinfectants, similar to pipe cleaning.
Provides advice on washing the vehicle more frequently during winter and protecting against frost.
Presents a detailed checklist for preparing the vehicle for lay-up, covering base vehicle, body, interior, gas, electrical, and water systems.
Lists additional measures required for laying up the vehicle over winter, including cleaning, fluid checks, and battery storage.
Provides a comprehensive checklist for starting the vehicle after storage, covering all major systems.
Details mandatory periodic official inspections and the requirement for gas system checks.
Emphasizes the need for regular inspections by qualified personnel and confirming work done.
Covers checking tyre pressure, tyre age, approved tyres, and handling punctures.
Emphasizes the importance of correct tyre pressure for safety, wear, and preventing damage.
Discusses checking tyre pressure on cold tyres, payload impact, pressure loss, and provides a table for tyre pressures.
Advises immediate remedy of braking system defects by an authorized workshop.
Lists common electrical faults, their causes, and remedies, including fuse checks and contact issues.
Continues the troubleshooting table for electrical system faults like battery charging and 12V power supply issues.
Continues troubleshooting for electrical faults related to 230V supply, appliance voltage, and battery discharge.
Covers troubleshooting for solar charging, overloaded batteries, and basic gas system faults like "no gas."
Lists faults related to the cooker, such as ignition issues and flame extinguishing, with remedies.
Details faults related to heater ignition, safety/drainage valves, fan operation, and LED indicators.
Continues troubleshooting for heater faults, including LED indicators, temperature settings, safety switches, and air circulation blockages.
Lists common refrigerator faults when operating on 230V, 12V, or gas, along with causes and remedies.
Addresses issues like water leakage, no water, incorrect tank readings, and clogged taps or nozzles.
Provides a table detailing model dimensions, number of seats, sleeping places, and outer dimensions.
Offers comprehensive checklists for kitchen, bathroom/sanitary, and living areas to ensure nothing essential is forgotten.
General