Need help?Do you have a question about the CAR-MON TSR-P and is the answer not in the manual?
Check unit for completeness, inspect for shipping damage, and review instructions before proceeding.
Details on mounting, power connection, drum rotation verification, and hose attachment procedures.
Periodically check and lubricate discharge duct bearing and cast steel flange bearing with grease.
Check chain drive tension, hose assembly, flange connection, and adapter for tears or cracks.
Follow specific maintenance procedures as outlined for the fan unit.
Verify electrical connections, wiring diagrams, and chain drive for proper operation.
Ensure proper hose attachment and consider limit switch adjustment if length is incorrect.
Inspect electrical connections, chain, and gear assembly for operational faults.
Confirm tube is clear, no foreign objects, and exhaust conditions are within specifications.
Adjusting the length of travel for up and down positions using control screws.
Instructions for power wiring to the junction box and the 'UP/DOWN' push button station.
Step-by-step guide to adjusting limit switches for reel travel end points.
Procedure for re-tensioning the chain drive by adjusting sprocket bolts.
Confirm proper chain tension by checking for approximately 1" deflection at mid-point.
To Next Page
General