To Next PageTo Next Page
Need help?Do you have a question about the Car Solutions FV-BENZ-567 and is the answer not in the manual?
Sets RGB signal input to enabled or disabled.
Enables or disables the AV1 input for DVD.
Enables or disables the AV2 input for tuner or extra video.
Sets RGB resolution between HD (800x480/VGA) and NTSC (480x240).
Configures reverse camera activation via Green wire signal.
Controls IR programming mode and touch calibration settings.
Maps DIP switch settings to specific screen resolutions (5, 6, 7 inch).
Procedure for removing dashboard components for access.
Using the control knob to switch inputs and navigate.
Guidance on connecting the monitor cable correctly.
Specific instructions for removing the screen assembly in certain models.
Defines the signal assignments for the 6-pin CAN box connector.
Details the color mapping for 4-pin CAN box input wires.
Information regarding CAN wiring and potential differences.
Suggests installing the interface in the driver's footwell for heat dissipation.
Explains the function of the menu, '+', and '-' keys for OSD adjustments.
Setting options for DVD, TUNER, or NAVI IR code output.
Configuration for displaying or hiding control icons on the screen.
Steps to program IR codes for controlling external devices.
Notes that AV2 IR programming follows the same procedure.
Adjusting image fit using the menu key pressed twice.
Describes the 8-pin CTRL port for advanced functions and custom boards.
Connecting the CTRL port for touch control of DVD and other devices.
Enables touch panel functionality for navigation during RGB input.
Details pin assignments and voltage outputs for the control port.
Explains the gray wire for control data, multimedia icons, and terminal mode.
Specifies amplitude requirements for RGB video and sync signals.
Defines impedance standards for AV1, AV2, and camera inputs.
Notes NTSC composite sync with negative polarity and VGA Hsync/Vsync XOR.
Automatic switching between NTSC, PAL, and SECAM video standards.
Details normal power usage and low standby current requirements.
Specifies standby delay and trigger voltage for reverse input.
Defines the operational temperature limits for the interface.
Lists the physical dimensions of the interface module.
Describes a 6-inch monitor for C-Class replacing the original 5-inch display.
Highlights features of the GLK replacement monitor.
Details RSE monitor converting LVDS signal for rear seat entertainment.
Introduces a version with an internal navigation computer and its connectors.
General| Brand | Car Solutions |
|---|---|
| Model | FV-BENZ-567 |
| Category | Car Video System |
| Language | English |
