Caravaggi Bio 100 - User Manual

Questions and Answers

C
Cindy DavisAug 9, 2025
How to troubleshoot a Caravaggi Tiller bio-chopper that won't start?
- R
  randallleeAug 9, 2025
  If your Caravaggi Tiller's bio-chopper isn't starting, begin by inspecting the belt tension and its overall condition. Then, check for any blockages in the pulleys, PTO, or gears. After that, examine the cutters, blade, counter-blade, and ensure there's no material obstructing the milling chamber. Finally, verify the engine/motor's condition, referring to its instruction manual for guidance.
G
Gregory DeanAug 15, 2025
What to do if my Caravaggi Bio 100 bio-chopper loses revs and functions irregularly?
- B
  Brett WhiteheadAug 15, 2025
  If your Caravaggi Tiller's bio-chopper loses revs and functions irregularly, start by checking the belt tension and condition, looking for blocked pulleys, PTO, or gears. Inspect the cutters, blade, counter-blade, and the milling chamber for any obstructions. Ensure the sieve is free from blockages. Check the engine/motor, consulting its manual. Finally, examine the material being chopped when the issue occurs.
D
David JohnsonAug 21, 2025
What causes excessive vibration in a Caravaggi Bio 100?
- R
  rodriguezamberAug 21, 2025
  If your Caravaggi Tiller is experiencing excessive vibration, check the cutters, blade, counter-blade, and the presence of material in the milling chamber.
B
bobbygriffinAug 27, 2025
What to do if the hopper rejects material on my Caravaggi Bio 100 Tiller?
- C
  Christopher FitzpatrickAug 27, 2025
  If the hopper on your Caravaggi Tiller is rejecting material, examine the cutters, blade, counter-blade, and check for any material within the milling chamber. Also, check the engine/motor, consulting its instruction manual, and inspect the wear on the hopper's rubber protection.
N
Nancy CarterSep 2, 2025
Why is my Caravaggi Tiller experiencing difficult start-up or loss of power?
- B
  blackpaulSep 2, 2025
  If you're experiencing difficult start-ups or power loss with your Caravaggi Tiller, check the belt tension and condition, and look for blocked pulleys, PTO, or gears. You should also check the engine/motor, consulting its instruction manual.