Cardinal Gates RETG - User Manual

GATE IS RECOMMENDED FOR CHILDREN AGES 6 MONTHS TO AGE 24 MONTHS. FOR INDOOR USE.
Made in China.
MODEL 4PG
RETRACTABLE GATE (RETG)
A
ASSEMBLY INSTRUCTIONS
MODEL
(770) 252-4200
Toll Free (800) 318-3380
www.cardinalgates.com
B
C
D
E
F
G
2
Install B, C, D, & E on the marks made
on wall using G screws.
LOCKING SIDE
RETRACTABLE GATE SIDE
X
Gate operates
in these two
directions.
WALL
FLOOR
1
Use templates
to mark
mounting
bracket
locations.
1
⁄8”
If installing in DRYWALL use F anchors.
If installing in WOOD TRIM drill pilot holes.
F
G
G
click!
3
Install gate by inserting DOWN over parts
D (top) and E (bottom/floor) until a click is
heard seating gate.
FLOOR
D
D
E
D
E
B
C
NOTE: After installing gate on wall, the bottom of
gate will be completely flat on the floor. The red
line on top of gate will not be seen if this gate is
correctly attached to the wall hooks.
Children have died or been seriously injured when gates are not securely installed.
· ALWAYS install and use gates as directed using all required parts.
· STOP using when a child can climb over or dislodge the gate.
· Use only with the latching mechanism securely engaged.
· NEVER use to keep child away from pool.
If installing at TOP OF STAIRS,
install at least 6 inches from the stair.
For openings 0-55”/0-140 cm

Summary

Assembly Instructions

Mounting Bracket Placement

Use templates to mark mounting bracket locations on the wall for installation.

Wall Installation Methods

Install in drywall using anchors or in wood trim by drilling pilot holes.

Gate Installation

Insert gate downwards onto wall parts D and E until it clicks into place.

Stair Installation Note

If installing at the top of stairs, ensure placement is at least 6 inches from the stair edge.

General Safety Warning

Critical safety information regarding proper installation and use to prevent serious injury.

Operating the Gate

Unlocking Procedure

Steps to unlock the gate by pushing the tab and lifting the center.

Locking Procedure

Simple steps to lock the gate by compressing the center mechanism.

Opening Procedure

How to open the gate after ensuring it is unlocked and expanding it.

Closing Procedure

Steps to close the gate by ensuring it's unlocked and pulling side tabs.

Gate Warranty and Care

Warranty Information

Details on the one-year manufacturing defect warranty for home use.

Exercising the Warranty

Instructions on how to submit a claim, including required documentation.

Gate Care Guidelines

Recommendations for proper gate use, maintenance, and safety suggestions.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the Cardinal Gates Retractable Gate (Model RETG), a safety product designed for children, pets, and homes.

Function Description:

The Cardinal Gates Retractable Gate is a safety barrier intended for indoor use, specifically recommended for children aged 6 to 24 months. Its primary function is to create a secure barrier in doorways or other openings to prevent children or pets from accessing certain areas. The gate features a retractable design, allowing it to be expanded when needed and retracted into its housing when not in use, thus saving space and maintaining an open aesthetic. The gate operates by extending a mesh barrier from a housing unit and securing it into mounting brackets on the opposite wall. It includes a locking mechanism to ensure the gate remains securely in place when closed.

Important Technical Specifications:

• Model: RETG (Retractable Gate)
• Openings: Suitable for openings from 0-55 inches (0-140 cm).
• Recommended Age: For children aged 6 months to 24 months.
• Installation: Designed for indoor use. Can be installed in drywall using F anchors or in wood trim by drilling pilot holes.
• Components: The gate system includes a main gate unit (A), mounting brackets (B, C, D, E), anchors (F), and screws (G).
• Mounting: The gate housing (A) attaches to one side of the opening, and the locking mechanism attaches to the opposite side using brackets D (top) and E (bottom/floor). Bracket B is a release mechanism on the retractable gate side, and C is a seating bracket on the locking side.
• Installation at Top of Stairs: If installing at the top of stairs, the gate must be installed at least 6 inches from the stair edge for safety.
• Safety Warning: Children have died or been seriously injured when gates are not securely installed. It is crucial to always install and use gates as directed with all required parts. The latching mechanism must be securely engaged. The gate should never be used to keep a child away from a pool. Stop using the gate when a child can climb over or dislodge it.

Usage Features:

• Installation Process:
  1. Use provided templates to mark mounting bracket locations on the wall.
  2. Install brackets B, C, D, and E on the marked locations using G screws. For drywall, use F anchors; for wood trim, drill 1/8" pilot holes.
  3. Install the gate by inserting it DOWN over parts D (top) and E (bottom/floor) until a "click" is heard, indicating the gate is seated.
  4. Ensure the bottom of the gate is completely flat on the floor after installation. The "red line" on top of the gate should not be visible if correctly attached to the wall hooks.
• Unlocking the Gate:
  1. Push forward (toward the wall) on the locking tab.
  2. Lift the center until a red indicator is shown.
• Opening the Gate:
  1. Ensure the gate is unlocked.
  2. Expand the gate by pulling it across the opening.
• Closing the Gate:
  1. Ensure the gate is unlocked.
  2. Pull down on the side tabs to release the gate from part B.
  3. Seat the bottom of the gate into part C.
  4. Pull down on the side tabs to lower the upper locking pin and push it under part B. Release to lock the gate in place.
• Locking the Gate:
  1. Simply compress the center of the locking mechanism.
• Retracting the Gate:
  1. Lift the gate out of part C, and the gate will retract back into its housing.
• Safety Guidelines:
  • Always close gates gently to prevent damage to the latch mechanism.
  • When closing, ensure the safety bracket on the gate frame engages as depicted in the instructions.
  • For safety, always close the gate when not in use.
  • Children should not be allowed to swing on an open gate, as this can damage the gate.

Maintenance Features:

• Warranty: Your Cardinal Gate is warranted to be free of manufacturing defects for one year from the date of purchase when used in homes according to manufacturer instructions. For commercial use (e.g., day care centers), the warranty is 90 days.
• Warranty Service: Cardinal Gates, Inc. will repair or replace, at its option, any parts necessary to correct defects in material or workmanship during the warranty period. The warranty disclaims liability for incidental, special, and consequential damages.
• Exercising Warranty: To exercise the warranty, ship the gate in a protective carton, freight prepaid, to Cardinal Gates, Inc., 79 Amlajack Way, Newnan, GA 30265. You must include proof of purchase (store receipt, etc.), a brief note describing the problem with the gate, and your full return address along with a phone number.
• Gate Care Suggestions: Cardinal Gates, Inc. designs its gates for durability with proper use and care. Gentle closing, ensuring proper engagement of safety brackets, and always closing the gate when not in use are recommended to prolong the gate's life.
• Accessories: Cardinal Gates, Inc. offers various accessories such as extensions, stair kits, and other safety products. Contact your dealer or Cardinal Gates, Inc. at 1-800-318-3380 for more information.

Cardinal Gates RETG Specifications

General

Brand	Cardinal Gates
Model	RETG
Category	Safety Equipment
Language	English