DANGERS, WARNINGS, CAUTIONS, & NOTICE
(Continued)
Never overload machine or dolly wheels.
Keep load centered on machine and dolly wheels. Slopes can greatly
shift the center of gravity of the load to one side or the other. Do not use on
slopes greater than 5%. Failure to do so could lead to injury or death.
Keep adequately clear of any objects that could move, shift, or fall;
causing injury or death.
Keep mast locked in the center-forward position at all times except
when needing to turn, and then straighten as quickly as possible and lock
mast again.
Do not wear loose or bulky clothing that can be caught in moving
parts causing injury or death.
Always shut off engine when leaving the machine. Never leave
machine running while unattended.
Do not run the machine while tired or while under the influence of
drugs or alcohol.
Do not permit any untrained or unsupervised personnel operate the
machine.
Always make sure machine and dolly wheels are securely locked to
object being moved before attempting any operation.
Never make any alterations to the factory settings of the machine.
For stability, always put dolly wheels as close as possible to the
outside edge of the object being moved.
Before transporting on any vehicle, always make sure machine, dolly
wheels, and all equipment is secured adequately and according to
Department of Transportation and other applicable regulations to ensure
safe transport. Any securing devices supplied by manufacturer may or may
not be adequate or meet regulations. User assumes responsibility for
adequate security and safe transport.
7
To Next Page
Loading...