CARDIOSTRONG EX90 - User Manual

Questions and Answers

R
Ronald SheppardJul 27, 2025
What to do if my CARDIOSTRONG Elliptical Trainer shows no pulse reading?
- M
  Matthew SnowJul 28, 2025
  If your CARDIOSTRONG Elliptical Trainer isn't displaying a pulse reading, there might be a few reasons. First, try to eliminate any nearby sources of interference like mobile phones or loudspeakers. If you're using a chest strap, make sure it's a suitable one, correctly positioned, and that the electrodes are moistened. If not, reposition the chest strap and/or moisten the electrodes. Also, check the batteries and replace them if necessary.
J
John TranAug 1, 2025
What to do if the display on my CARDIOSTRONG Elliptical Trainer does not work?
- J
  Jon SharpAug 1, 2025
  If the display on your CARDIOSTRONG Elliptical Trainer isn't working, check that all plug connections are secure and ensure the power supply is properly plugged in.
M
marycoxAug 6, 2025
Why are my CARDIOSTRONG Elliptical Trainer guide rails squeaking?
- M
  Micheal ClarkeAug 7, 2025
  Squeaking guide rails on your CARDIOSTRONG Elliptical Trainer usually mean the guide rails or rollers are dirty, or the guide rails are dry. Clean the guide rails and then lubricate them with a non-greasy silicone.
K
Kenneth MayerAug 11, 2025
Why is my CARDIOSTRONG Elliptical Trainer making creaking noises?
- A
  Anthony JenkinsAug 11, 2025
  Creaking noises in your CARDIOSTRONG Elliptical Trainer often indicate that some screws are loose. Inspect all screws and tighten them properly.
B
Brendan WilliamsAug 17, 2025
How to fix creaking footplates on my CARDIOSTRONG Elliptical Trainer?
- R
  Robert HicksAug 17, 2025
  If the footplates on your CARDIOSTRONG Elliptical Trainer are creaking, it's likely that the footplates are loose. Tighten the footplate screws to resolve this issue.
M
michelle37Aug 21, 2025
How to stop my CARDIOSTRONG Elliptical Trainer drive discs from wobbling or making noises?
- S
  simpsonginaAug 21, 2025
  If the drive discs on your CARDIOSTRONG Elliptical Trainer are wobbling or making noise, the drive pulley might be loose. Tighten the nuts to secure it.