Elliptical Trainer
TO INSTALL BATTERIES:
Remove battery cover
on
back of monitor.
Insert two fresh "M " batteries.
Ensure that the batteries are
correctly positioned and that proper contact
is
made with terminals.
NOTE:
Removing the batteries will erase any stored monitor function .
NOTE The monitor
is
equipped with
an
auto
ON
/auto OFF function that will turn the monitor
ON
when the Elliptical
Trainer is
in
use, and OFF if the Elliptical Trainer is not used for 8 minutes.
FUNCTIONS
AND
OPERATIONS
To
select
the
function
display
on
the
monitor
by
pressing
MODE
button.
There
will
be
an
indicator
(arrow
sign)
on
the
right/left
side
of
the
screen
shows
which
function
display
it is
SCAN: To activate scanning function, press button until arrow on LCD points to "SCAN". The monitor will
no
w
automatically scroll through "TIME
",
"SPEED", "DIST", "CA
L",
and
"000"
while riding E
lli
ptical Traine
r.
SPEED: To display current speed, press button until LCD arrow points
to
"SPEED".
NOTE: If
monitor displays "M"
in
lower right-hand corner of LCD, the unit of speed
is
in
mph.
DISTANCE: To activate distance function, press button until arrow
on
LCD points to "DIS
T".
The monitor
wi
ll
noVv
display the selected trip distance.
NOTE: If monitor displays "M"
in
lower right-hand corner of LCD, the traveled distance
is
in
miles. If monitor does
NOT display "M"
in
lower right-hand corner, the traveled distance
is
in
kilometers.
TIME: To activate timer function, press button until arrow
on
LCD points to "TIME". The monitor will now display the
current time of the exercise session (min:sec
).
.
ODOMETER: To activate the odometer function, press button until arrow
on
LCD point6 to
"000
".
The monitor will .
now display the traveled distance.
NOTE: If monitor displays "M"
in
lower right-hand corner of LCD, the traveled distance is
in
miles. If monitor does
NOT display "M"
in
lower right-hand corner, the traveled distance
is
in
kilometers.
CAL: To activate calories burned function, press button until arrow
on
LCD points to "CAL". The monitor will now
disp
la
y the calories burned.
PULSE: Press "MODE" button until "\7 " appears beside "PUL
SE
" on LCD. Place and hold both of your palms
on
the contact pads. After a few seconds, the monitor will display your current h
ea
rt rate
in
beats per minute (BPM). As
long as your
pa
lms are placed
on
the contact pads,
th
e monitor will continue to
re
ad and display your pulse rate.
NOTE: Dur
ing
th
e process of
pu
lse measurement, t
he
va
lue may
be
slightly higher
in
the first few seconds due
to
contact jammi
ng
. The
pu
l
se
measurement value MUST NOT be regarded
as
th
e basis of medical tr
ea
tment.
SPECIFICATIONS:
Au
to
scan: Eve
ry
4 seconds.
Speed: 99
.9
mph or
km
/h
Distan
ce:
0.
01
-9
99.9 m or
km
Time:
00
:
00
to
99
:
59
(min:sec)
Odometer: 1- 9999 m or
km
Calories; 0.1-999
.9
cal
Pulse: 40
-24
0 BPM
Controller
: 4-bit, 1
chip
microprocessor
Sensor: No-contact magnetic type
Battery type: 2
"M " batteries
Operating temperature:
0° to 40°C
(32
°
to
1
04
O
F)
Storage temperature: _20° to
50
°C (
-4
°
to
122°F)
To Next Page
Loading...