Carefree Freedom RM User Manual

052978-351r8 Printed in USA November, 2018
S ERVICE M ANUAL
FREEDOM RM
R OOF M OUNTED L ATERAL A RM A WNING
M ANUAL AND M OTORIZED F REEDOM RM
RV
Read this manual before installing or using this product. Failure to follow the
instructions and safety precautions in this manual can result in personal injury
and/or cause the product to not operate properly.
M
ANUAL
M
OTORIZED
The Freedom Awnings are state of the art lateral arm awnings. When retracted, the housing provides
protection against the elements while the streamlined styling blends in with the coach sidewall. The full
tension canopy fabric allows the awning to be partially or fully extended for best shade coverage.
Each unit is equipped with lateral support arms. No vertical arms interfere with coach sidewalls, custom
graphics or equipment that may be mounted on the sidewalls.
Additional Features:
 Fully retractable and self-storing;
 Available as manual or motorized; (Note: 4.5 & 5 meter only available as motorized)
 The sealed awning motor operates on standard 12VDC (range 10VDC to 14VDC);
 Case and frame are constructed of high-strength aluminum extrusions .
These instructions apply to all models listed. Details and procedures unique to a specific
model are labeled appropriately.

Carefree Freedom RM Specifications

General

Type	Menstrual Cup
Product Type	Menstrual Cup
Material	Medical Grade Silicone
Reusable	Yes
Capacity	30ml
Diameter	43mm
Length	70mm
Sterilization	Yes

Summary

Introduction and Safety Information

Safety Information Overview

Key safety warnings, hazard symbols, and general safety precautions for awning operation.

Product Specifications and Configuration

System Adjustments and Maintenance

Manual Override Procedure

Steps for manually retracting a motorized awning when vehicle power is unavailable.

Adjusting Motor Limit Switches

Procedures for adjusting the 'out' and 'in' limit switches for proper awning extension and retraction.

Component Replacement Procedures

Canopy Replacement (Original Configuration)

Canopy Replacement (Current Configuration)

Spring Arm and Lead Rail Connector Replacement

Arm Replacement Procedure

Detailed instructions for detaching and attaching spring arms to the lead rail and case.

Motor Replacement (Original Configuration)

Steps for removing the old motor and installing a new motor in the original configuration.

Motor Replacement (Current Configuration)

Procedures for replacing the motor in the current motorized awning configuration.

Switch Wiring for Motorized Awning