Need help?Do you have a question about the CareFusion Alaris SE and is the answer not in the manual?
Overview of the manual and pump's intended use and capabilities.
Instructions for removing the instrument from its packaging and initial checks.
Procedures for verifying and setting up new or recently serviced instruments.
Guidelines for storing the instrument when not in use.
Information on using administration sets with the Alaris SE pump.
Setting up and managing primary infusions.
Setting up and managing secondary (piggyback) infusions.
Using the calculator for drug-specific infusion rates.
Setting up an initial high-rate infusion dose.
Programming multiple doses at scheduled intervals.
Programming sequential infusions with varying rates.
Overview of available monitoring modes.
Details on using resistance monitoring.
Details on using pressure monitoring.
How the system detects upstream occlusions.
Initial steps for preparing the instrument for use.
Actions to take when a maintenance reminder appears.
Connecting the instrument to a nurse call system.
Connecting the instrument to a computer via RS-232.
Critical safety information and precautions for using the pump.
Information on battery features and maintenance.
Information about the optional flow sensor.
Explanation of the instrument's controls, indicators, and displays.
Definitions of configurable settings and features like Air-in-Line and Audio.
Table summarizing configurable features, options, and defaults.
Compatible sets and list of possible alarms.
Battery specifications and physical instrument dimensions.
Details on downstream occlusion, flow rates, and accuracy.
How delivery conditions affect flow characteristics.
Performance curves for the Pressure Mode.
Performance curves for the Resistance Mode.
Performance curves for the High Resistance Mode.
How the air-in-line detection system works.
Information on system messages and alerts.
Regular and preventive maintenance inspection guidelines.
Procedures and guidelines for cleaning the instrument.
Information on instrument service and obtaining technical support.
Statement of compliance with regulations.
List of standards the Alaris SE pump complies with.
List of registered trademarks.
Overview of the manual and pump's intended use and capabilities.
Instructions for removing the instrument from its packaging and initial checks.
Procedures for verifying and setting up new or recently serviced instruments.
Guidelines for storing the instrument when not in use.
Information on using administration sets with the Alaris SE pump.
Setting up and managing primary infusions.
Setting up and managing secondary (piggyback) infusions.
Using the calculator for drug-specific infusion rates.
Setting up an initial high-rate infusion dose.
Programming multiple doses at scheduled intervals.
Programming sequential infusions with varying rates.
Overview of available monitoring modes.
Details on using resistance monitoring.
Details on using pressure monitoring.
How the system detects upstream occlusions.
Initial steps for preparing the instrument for use.
Actions to take when a maintenance reminder appears.
Connecting the instrument to a nurse call system.
Connecting the instrument to a computer via RS-232.
Critical safety information and precautions for using the pump.
Information on battery features and maintenance.
Information about the optional flow sensor.
Explanation of the instrument's controls, indicators, and displays.
Definitions of configurable settings and features like Air-in-Line and Audio.
Table summarizing configurable features, options, and defaults.
Compatible sets and list of possible alarms.
Battery specifications and physical instrument dimensions.
Details on downstream occlusion, flow rates, and accuracy.
How delivery conditions affect flow characteristics.
Performance curves for the Pressure Mode.
Performance curves for the Resistance Mode.
Performance curves for the High Resistance Mode.
How the air-in-line detection system works.
Information on system messages and alerts.
Regular and preventive maintenance inspection guidelines.
Procedures and guidelines for cleaning the instrument.
Information on instrument service and obtaining technical support.
Statement of compliance with regulations.
List of standards the Alaris SE pump complies with.
List of registered trademarks.
General| Power Requirements | 100-240 VAC, 50/60 Hz |
|---|---|
| Delivery Rate Range | 0.1 mL/h to 1200 mL/h |
| Volume To Be Infused (VTBI) Range | 0.1 mL to 9999 mL |
| Occlusion Pressure Settings | Low, Medium, High |
| Battery Type | Rechargeable Lithium-ion |
To Next Page
