Updated:
17/03/2010
Ver. 1.1
Eng
Pag.10/12
TEMPERATURE ALARMS AND SIGNALS
TEMPERATURE
ALARMS
HIGH OR LOW TEMPERATURE ALARMS DUE TO MALFUNCTIONING OR
COMPONENTS FAILURE PRODUCE A WARNING SIGNALS ON THE
DISPLAY BY MEAN OF THE ALARM ICON
.
LOW
TEMPERATURE
ALARM
In case of low cavity temperature, referred to the cavity probe, the
display shows a flashing error code LO.
Temperature alarm icon is flashing and the acoustic signal ACTIVE.
This alarm is automatically reset when cavity temperature increase over
the minimum temperature threshold, depending from the parameter AL
HIGH
TEMPERATURE
ALARM
In case of high cavity temperature, referred to the cavity probe, the
display shows a flashing error code HI.
Temperature alarm icon is flashing and the acoustic signal ACTIVE.
This alarm is automatically reset when cavity temperature decrease
under the maximum temperature threshold, depending from the
parameter AH
CONDENSER FAN
ALARM
In case of condenser fan faulty or malfunctioning display shows a
flashing error code SEr
Temperature alarm icon is flashing and the acoustic signal ACTIVE
Pressing Prg/mute button the buzzer is DISABLED but the alarm signal
is still active and shown on the display
To Next Page
Loading...
