Carel pCOWeb - 9.2 ACCESSING THE CONFIGURATION PAGES

pCOWeb +030220966 – rel. 1.1 – 12.12.2017 43
MENU AREA
The “Menu” area is always the same for all the main configuration pages.
It contains:
• A – buttons for opening the main configuration pages.
• B – “Reboot” button; when selecting this, pCOWeb will be rebooted
without requesting confirmation. This is required in some phases of the
configuration.
• C – System is using (see 3.1.2 on page 12):
- Factory Parameters: pCOWeb is using the Bootswitch parameters
(
Figure 3.h on page 14).
- User Parameters: pCOWeb is using the parameters set by the
user.
• D – displays the pCOWeb firmware version:
A: Applications B: Bios.
IMPORTANT: do not confuse this with the firmware version
(“BIOS”) of the pCO!
• E – displays the pCOWeb MAC address (see 2.2 on page 10).
• F – displays the pCOWeb date and time at the moment of the last update
requested for the page displayed from the PC (for example with F5).
• G – symbol that the HTML page conforms to the HTML 4.01 standard.
• H – BTL Mark: it shows that pCOWeb has been successfully tested by
the BACnet Testing Laboratories. Clicking the image will open pCOWeb’s
listing on BTL web site.
Figure 9.d - Menu area
9.2.3 Displaying the main page
When a configuration page is displayed, the main page can be recalled by clicking
“Customer Site”; a new window will be opened with the main page, index.html
where featured, customized via FTP or SCP by the user when creating the site in
relation to the pCO application program used; if not, the page displayed will be the
default (
Figure 3.g on page 14).
Figure 9.e - Displaying the main page
9.2.4 Useful contacts
Clicking “Info & Contact” displays the following page with useful contacts at
CAREL.
Figure 9.f - Useful contacts at CAREL