Need help?Do you have a question about the Carel pCOWeb and is the answer not in the manual?
General| Product Type | Network Card |
|---|---|
| Model | pCOWeb |
| Manufacturer | Carel |
| Interface | Ethernet |
| Ethernet | 10/100 Mbps |
| Power Supply | 24 Vac/Vdc |
| Web server | Yes |
| Remote access | Yes |
| Data logging | Yes |
| Alarm management | Yes |
| Compatibility | pCO controllers |
| Protocols | HTTP, SNMP, Modbus TCP/IP |
| Protocol | Modbus TCP/IP |
| Humidity Range | 10 to 90% RH non-condensing |
Information regarding the proper disposal of the pCOWeb product in accordance with EU directives.
Details the various functions offered by the pCOWeb device, including WEB server, Logger, and notifications.
Explains the status and network indicator LEDs on the pCOWeb, their meanings and associated signals.
Provides step-by-step instructions for physically installing the pCOWeb device onto the pCO controller.
Guides users through the direct connection of pCOWeb to a PC for initial setup and configuration.
Details how to connect the pCOWeb to a PC through a network connection.
Explains how to use the WEB server function to display custom HTML pages on the pCOWeb.
Covers setting up notifications via E-mail, FTP Push, and SNMP traps for events.
Enables clock synchronization with the pCO controller using specified integer variables.
Details the Logger function for saving variable values and creating graphs.
Summarizes basic SNMP configurations for pCOWeb, including system and default trap settings.
Explains BACnet features like alarming and customization of alarm messages.
Details the Modbus TCP/IP configuration settings for the pCOWeb device.
Guides users on how to access the pCOWeb's configuration pages via a web browser.
Guides on setting network communication parameters like IP address, NetMask, Gateway, and DNS.
Guides users on how to update the pCOWeb firmware via Ethernet connection.
Lists the various communication protocols supported by the pCOWeb.
Explains the DHCP method for automatic IP address assignment, the default for pCOWeb.
Explains the function and configuration of proxy servers in network communication.
Details the process of writing a variable from pCOWeb to the pCO controller.
Guides on configuring the ArGoSoft Mail Server, including setting domains.
Details how to configure users in the FileZilla Server for FTP access.
Explains how to use the iReasoning MIB Browser as a TRAP receiver.
Details CAREL tags for reading and writing pCO variables within HTML pages.
Explains the HTML pages used for plugin configuration.
Details Modbus TCP/IP maps for pCOWeb versions up to 1.4.x.
To Next Page
