Carex B651 - Attach Backrest to L Bars; Attach L Bars and Tighten Screws; Install and Adjust Leg Extensions; Final Checks and Placement

Assembly Instructions
Bath and Shower Seat
Slip leg extensions
on, push copper pin
and slide on, line
up pin and hole so
pin pops through
leg extension hole
completely.
Repeat for all 4
legs.
Adjust height so all
legs are the same
height.
Check for stability.
Assure all pins are
completely through
the holes and legs
are all the same
height.
Place Bath and
Shower Bench in
shower or bath.
Periodically check
to assure that all
screws remain tight.
Place L bar over U bar holes so holes line up.
Screw in using long screws - include washer.
Do not tighten yet.
Repeat with other L Bar. Tighten the 4 long screws.
Tighten the middle medium screw. Periodically check
to assure that all screws remain tight.
5
4
6
1
1
2
2
LARGE SCREWS
Attach backrest to both L bars.
Press in the pop pins and line
up with backrest holes. Assure pins are
completely through the holes.
3