EasyManua.ls Logo

CARING MILL BM 31 - General Safety Precautions; Device Protection Standards

CARING MILL BM 31
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
CAUTION
Indicates a potentially hazardous situation,
which, if not avoided, may result in minor/
moderate injury.
NOTICE
Addresses practices not related to personal
injury, such as product and/or property
damage.
Product information
N
ote on important information
Observe the instructions
Read the instructions before starting work
and/or operating devices or machines
Isolation of applied parts Type BF
Galvanically isolated applied part (F stands
for “floating”); meets the requirements for
leakage currents for type B
Direct current
The device is suitable for use with direct
current only
Storage/Transport
Permissible storage temperature and humidity
Operating
Permissible operating temperature and
humidity
IP21
IP class
Device protected against foreign objects ≥
12.5 mm and against water dripping at an
angle
Serial number
WARNING – To reduce the risk of fire, electric shock,
or serious personal injury:
For consistency, always measure your blood pressure at
the same time each day.
Before each measurement, relax for about five minutes.
When performing multiple measurements on an
individual, wait one minute between each measurement.
Do not take a measurement within 30 minutes of eating,
drinking, smoking or exercising.
Repeat the measurement if you are unsure of the results.
Measurements are for your information only – they are
no substitute for a medical examination. Discuss the
measurements with your doctor and never base any
medical decisions on them (e.g. medicines and their ad-
ministration).
Using the blood pressure monitor outside your home
environment or whilst on the move (e.g. whilst travelling
in a car, ambulance or helicopter, or whilst undertaking
physical activity such as playing sport) can influence
the measurement accuracy and cause incorrect
measurements.

Related product manuals