Carl Goldberg Products decathlon arf User Manual

Aerobatic flying just doesn't get any better than this Decathlon ARF. Its clean lines, long tail moment, and
superb wing design will reward you with the maneuvers you love - knife edge, split S, lumcevac, torque rolls,
snaps, and ground-hugging inverted flight. What's more, we've engineered this ARF to get you into the air with
a minimum of fuss. So take a few minutes to carefully read the introductory material and then get to work. You'll
soon be out at the field with a classic aerobatic champion!
WARNING
A radio-controlled model is not a toy and is not intended for persons under 16 years old. Keep
this kit out of the reach of younger children, as it contains parts that could be dangerous. A radio-
controlled model is capable of causing serious bodily injury and property damage. It is the buyer's
responsibility to assemble this aircraft correctly and to properly install the motor, radio, and all other
equipment. Test and fly the finished model only in the presence and with the assistance of another
experienced R/C flyer. The model must always be operated and flown using great care and common
sense, as well as in accordance with the Safety Code of the Academy of Model Aeronautics
(www.modelaircraft.org). We suggest you join the AMA and become properly insured prior to flying this
model. Also, consult with the AMA or your local hobby dealer to find an experienced instructor in your
area. Per the Federal Communications Commission, you are required to use only those radio fre-
quencies specified "for Model Aircraft."
LIMITED WARRANTY
Carl Goldberg Products, Ltd. has inspected and certified the components of this aircraft. The company urges the buyer to perform
his own inspection, prior to assembly, and to immediately request a replacement of any parts he believes to be defective for their
intended use. The company warrants replacement of any such components, provided the buyer requests such replacement with-
in a period of one year from the date of purchase and provided the defective part is returned, if so requested by the company.
No other warranty, expressed or implied, is made by the company with respect to this kit. The buyer acknowledges and under-
stands that it is his responsibility to carefully assemble the finished flying model airplane and to fly it safely. The buyer hereby
assumes full responsibility for the risk and all liability for personal or property damage or injury arising out of the buyer's use of the
components of this kit.
DDEECCAATTHHLLOONN AARRFF
Pt. #2017 3/01
CARL GOLDBERG PRODUCTS, LTD.
P.O. Box 818 Oakwood GA 30566 Phone #678-450-0085 Fax # 770-532-2163 www.carlgoldbergproducts.com
© Copyright 2001 Carl Goldberg Products LTD.

Carl Goldberg Products decathlon arf Specifications

General

Brand	Carl Goldberg Products
Model	decathlon arf
Category	Toy
Language	English

Summary

Introduction

Preparing for Assembly

Details the necessary workspace and materials for starting the aircraft assembly process.

Construction Tips

Provides essential advice for efficient and accurate assembly, including reading ahead and checking steps.

Adhesives & Gluing Techniques

Explains the proper use of different adhesives like CA and epoxy for model construction and safety precautions.

Covering

Describes the method for applying and repairing the polyester film covering for a smooth finish.

Wing Assembly

Aileron Installation

Step-by-step guide for attaching the ailerons to the wing using hinges and CA glue.

Aileron Servo Installation

Instructions for mounting the aileron servos, including servo doors and mounting blocks.

Aileron Control Horn Installation

Details on how to install the control horns and connect them to the aileron servo linkage.

Servo Extension Installation

Guidance on connecting and routing servo extension wires through the wing for aileron servos.

Mounting Wing to Fuselage

Procedure for securely attaching the assembled wing to the aircraft fuselage using dowels and screws.

Wing Strut Installation

Instructions for fitting and securing the wing struts to the wing and fuselage assembly.

Tail Assembly

Stab Installation

Steps for accurately positioning and attaching the horizontal stabilizer to the fuselage.

Fin Installation

Guide for mounting the vertical stabilizer fin perpendicularly to the horizontal stabilizer and fuselage.

Rudder & Elevator Control Horn Installation

Instructions for installing control horns on the rudder and elevator for control surface connection.

Rudder & Elevator Installation

Procedure for hinging the rudder and elevator to the tail assembly using jet hinges.

Fuselage Assembly

Landing Gear Installation

Steps for attaching the main landing gear and tailwheel assembly to the fuselage.

Servo Installation

Guide for fitting and securing servos within the fuselage tray, including servo blocks.

Rudder Cable Installation

Instructions for installing the control cables for the rudder, including routing and connections.

Elevator Pushrod Installation

Detailed steps for creating and installing the elevator pushrod system for control surface movement.

Motor Mount/Engine Installation

Throttle Pushrod Installation

Guide for installing the throttle pushrod system, connecting the servo to the engine throttle arm.

Fuel Tank Installation

Procedure for assembling and installing the fuel tank, including fuel lines and stopper assembly.

Cowl Installation

Radio Switch Installation

Steps for mounting the radio switch and its cover onto the fuselage for easy access.

Receiver and Battery Installation

Instructions for placing and securing the receiver and flight battery within the fuselage compartment.

Window Installation

Guide for fitting and gluing the windshield and side windows to the fuselage.

Wheel & Wheel Pant Installation

Procedure for assembling and attaching the wheels and wheel pants to the landing gear.

Finishing Touches

Tail Bracing Wire Installation

Instructions for installing tail bracing wires to provide rigidity and support to the tail assembly.

Propeller and Spinner Installation

Balancing the Model

Crucial steps for ensuring the aircraft's center of gravity is correctly set for stable flight.

Flying Your Decathlon ARF

Setting Control Surface Travels

Guidance on adjusting control surface throws for gentle and aerobatic flight modes.

Field Kit Checklist

A list of essential items to bring to the field for successful operation and maintenance of the aircraft.

Pre-Flight Activities

Essential checks and procedures to perform before each flying session for safety and performance.

Take-Offs & Landings

Tips and techniques for performing smooth and controlled take-offs and landings with the aircraft.

Beginning Aerobatics

Introduction to basic aerobatic maneuvers like loops and rolls, with advice for practice.