To Next PageTo Next Page
Need help?Do you have a question about the Carlisle Binks 183S and is the answer not in the manual?
General| Brand | Carlisle |
|---|---|
| Model | Binks 183S |
| Category | Water Heater |
| Language | English |
Instructions and safety precautions to follow before operating equipment.
Overview of Binks pressure feed tanks and their intended use.
Comparison of nominal tank size to actual fluid holding capacity.
Explanation of symbols used to denote hazards and important information.
Essential safety practices including personal protection, equipment operation, and emergency procedures.
Mitigation strategies for fire and explosion risks related to solvents and static electricity.
Ensuring safe material handling and proper operator training for tank assemblies.
Step-by-step guide to safely relieve pressure before servicing or opening the tank.
Details on tank construction, pressure limits, and component materials.
Comparison of nominal tank size to actual fluid holding capacity.
Overview of different air regulation types and their applications.
Description of available agitator types and their suitability for various materials.
Guidance on mixing, straining, and adding material to the tank.
Steps for pressurizing the tank, connecting air, and testing the spray.
Procedures for cleaning the equipment and lubricating agitator components.
Common issues, their causes, and recommended corrections for tank operation.
Visual representation of the tank assembly components.
Illustration and list of hardware required for proper equipment grounding.
Detailed list of part numbers and descriptions for 5-gallon models.
Detailed list of part numbers and descriptions for 10-gallon models.
Detailed list of part numbers and descriptions for 15-gallon models.
Configuration for controlling tank pressure only.
Configuration for controlling tank pressure and spray gun atomization pressure.
Provides high precision control of tank pressure from 0-30 PSI.
High precision tank pressure control plus standard spray gun regulation.
Kit to convert single regulator or extra-sensitive air control to double regulator.
For tanks regulated by an external source.
Converts tank from top outlet to bottom outlet with leg support.
Primary fluid strainer attaching between outlet valve and hose.
Units designed to remove dirt, pipe scale, and liquid aerosol from air.
Molded polyethylene liners to reduce solvent waste and tank cleanup time.
Economical strainers for removing foreign material from paint and coatings.
Details on limited warranty for materials and workmanship.
Contact information for technical support and locating authorized distributors.
