Need help?Do you have a question about the Carlson Pet Products TUFFY and is the answer not in the manual?
General| Brand | Carlson Pet Products |
|---|---|
| Model | TUFFY |
| Category | Indoor Furnishing |
| Language | English |
Key safety instructions including secure installation, avoiding stairs, and proper use with pets and children.
Place the gate in an opening between 26-42 inches wide, ensuring an even surface.
Pull the gate frame apart to span the doorway width, ensuring it fits securely.
Pull the locking pin up and slide the adjustment device towards the center to position the gate.
Push the locking pin down into the horizontal bar to secure the adjustment device in place.
Use the turning knob to tighten the gate, creating pressure for stability and security.
To open the small pet door, pull back on the spring pin.
Rotate the turning knob counterclockwise to release pressure and loosen the gate.
Lift the locking pin and slide the adjustment device away from the gate's middle.
Slide gate panels inward and remove the gate from the doorway or opening.
Periodically check for damage, wear, or loose mountings. Clean with mild detergent and water.
Details the 90-day limited warranty, covering defects in materials or workmanship.
Identifies the Pet Door Pull Lock, available in white with part number #13038.
Identifies the Rubber Bumper, available in black with part number #11018.
To Next Page