STEP 4
When you are satisfied with the general placement of your gate, fully tighten the threaded
spindle rods attached to the lower corners of the gate by further rotating the adjustment wheels.
Continue by tightening the upper threaded spindle rods. As you
tighten the upper threaded spindle rods, you will notice the gap
between the door frame and the easy open latch begin to narrow.
In order for the gate to function properly, stop tightening the upper threaded spindle
rods just before the inner wall of the locking latch and the gate frame touch.
GATE FRAME
LOCKING LATCH
NOTE: There should be equal spacing among each of the (4) threaded spindle rods.
Make the appropriate adjustment to ensure you have installed your gate safely.
8 ENGLISH
To Next Page
Loading...
