hot parts of the device.
• Always make sure that the lead
is unencumbered when you
move the device around.
• Avoid tripping over the lead.
• Never cover the lead with a
rug, mat, blanket etc.
• Never wrap the lead around
the device.
• Let the device cool before
storing or cleaning it.
• Store the device in a safe
place to prevent accidental
erroneous use.
• The device must be stored in
a dry place at temperatures
between 15°C and 25°C.
• Do not expose the device
to heat (radiator, oven, etc.),
direct sunlight or humidity.
• Keep the device clean and do
not use abrasives or products
containing solvents.
• Connect the device only to an
electrical system that meets
the prevailing regulations
and that is equipped with a
delay fuse. Make sure that
the maximum current of all
devices connected to this fuse
does not exceed its maximum
current (16A).
• We recommend equipping the
group to which the bathroom
14
To Next Page
Loading...
