7
USING YOUR APPLIANCE
Charging
1. Insert the appliance plug into the appliance
2. Insert the mains plug into the power socket
3. When you connect the appliance to the mains to charge it, the
power symbol lights up. It takes 8 hours to charge the appliance
from at.
4. Remove the mains plug from the socket. The epilator can be used
typically for 30 min after a full charge.
5. Replace the head on epilator, xing the shaving head onto the body.
6. Switch the appliance on.
7. Using the trimmer rst if the hair is long then use the shaver.
8. Switch the appliance o.
CLEANING YOUR APPLIANCE
1. For the best result, it is essential that you clean the epilator head
after each use.
2. Never immerse the appliance in water.
3. Do not use aggressive cleaners, scouring agents, petrol, acetone
etc. to clean the plastic housing of the appliance.
4. Do not exert pressure on the epilator discs to avoid damaging it.
STORING YOUR APPLIANCE
1. Ensure the appliance is completely cool and dry.
2. Do not wrap the cord around the appliance, as this will cause
damage.
3. Store the appliance in a cool, dry place.
To Next Page
Loading...