EasyManua.ls Logo

caron 6030 - User Manual

Default Icon
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CARON 6000 SERIES
ENVIRONMENTAL TEST CHAMBERS
MODELS 6010, 6011, 6012, 6030, 6031, & 6032
OPERATIONS MANUAL
Question and Answer IconNeed help?

Do you have a question about the caron 6030 and is the answer not in the manual?

Summary

Safety System Features

Model 6010 Specifications

Model 6030 Specifications

Installation Procedures

Chamber Location Requirements

Guidelines for selecting a dry, clean, level area, considering clearances and environmental factors.

Drain and Power Connections

Drain Connection Setup

Instructions for connecting the 3/8" NPT drain line to the back of the chamber.

Electrical Power Requirements

Emphasizes proper grounding and recommends a dedicated wall outlet for the chamber.

Basic Operation Instructions

Controller Functions and Alarms

Temperature Deviation Alarm System

Explains the temperature monitoring, alarm notification, and delay features.

Humidity System Operations

Humidity System Description

Details the bi-modal system for humidification and dehumidification up to 98% RH.

Humidity System Configuration

Heatless Dryer Package Overview

Heatless Dryer Package Installation

Dryer Package Installation Steps

Guides on attaching the dryer package and connecting air supply.

Dryer System Testing and Adjustment

Procedures for setting pressure regulator and air flow rate for optimal performance.

Sensor Wire Connections for Chart Recorder

Sensor Wire Connections for Chart Recorder (cont.)

Maintenance - Control Panel Access

Chamber Maintenance Schedule

Troubleshooting Common Issues

Appendix A: Watlow 96 Controller

Changing Set Points on Watlow 96

Procedure for adjusting temperature and humidity setpoints using the controller.

Watlow 96 Controller Configuration and Settings

Controller Calibration and Offset Adjustment

Steps to set temperature or humidity offsets for accurate readings.

Appendix B: Watlow SD Controller

Changing Set Points on Watlow SD Controller

Procedure for adjusting temperature and humidity setpoints using the SD controller.

Adjusting Alarm Settings on Watlow SD Controller

Steps for modifying high and low alarm settings on the SD controller.

Watlow SD Controller Calibration Procedure

Procedure for setting temperature or humidity offsets on the SD controller.

caron 6030 Specifications

General IconGeneral
Brandcaron
Model6030
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals