Need help?Do you have a question about the Carp Sounder XRS ACC and is the answer not in the manual?
General| GPS | No |
|---|---|
| Power source | Battery |
| Channels | 4 |
| Frequency Range | 433 MHz |
| Display | LED |
| Beam Angle | Not applicable |
| Depth Range | Not applicable |
Digital Wireless Bite Alarm.
Digital wireless bite alarm for modern catfishing.
Infrared alarm system to secure the fishing spot.
Digital radio receiver with ACC radio control.
Detailed features, construction, and adjustable parameters.
Diagram identifying device layout, LEDs, and buttons.
Explanation of how different bite types are signaled by the alarm.
Instructions for powering the device on/off and checking battery status.
Navigation guide and list of available settings menus.
Procedures for modifying volume, pitch, and sensitivity.
Guide to selecting LED colors and understanding light bar indicators.
Information on activating and using ACC light and nightlight features.
Steps required to establish a wireless radio connection.
Instructions for battery changes and resolving common operational issues.
Overview of construction, features, sensitivity options, and battery type.
Diagram identifying the device's control layout and buttons.
Explanation of signals for vibration, inclination, line breaks, and low battery.
Procedures for powering the device on/off, checking battery, and adjusting volume.
Guide to adjusting vibration sensitivity levels and understanding color feedback.
Guide to adjusting inclination sensitivity and disabling detection.
Procedures for selecting pitch and LED color options.
Steps to pair the bite alarm with the receiver using radio coding.
Instructions for resetting to factory defaults and overview of default configurations.
Instructions for battery changes and resolving common operational issues.
Overview of construction, features, and battery type.
Diagram identifying the transmitter's control layout and buttons.
Instructions for powering the device on/off and checking battery status.
Guide to adjusting sensitivity and LED brightness levels.
Explanation of DIP switch settings for XRS and ONE systems.
Steps for radio coding with XRS and CS receivers.
Procedure to change LED color when the ONE system is selected.
Guidance on transmitter placement and important safety cautions.
Instructions for resetting to factory defaults and overview of default configurations.
Instructions for battery changes and resolving common operational issues.
Overview of receiver housing, features, and battery requirements.
Diagram identifying the receiver's control layout and multicolor LEDs.
Instructions for powering on/off, checking battery, and adjusting volume.
Guide to activating the ACC light and energy saving mode.
Information on vibration alerts and setting radio coding.
Instructions for battery changes and resolving common operational issues.
Declaration of conformity and radio transmission specifications.
Instructions for environmentally sound disposal and WEEE registration.
Details on warranty period, exclusions, and claims procedures.
To Next Page